Bedienungsanleitung Solac SW8231 (Seite 11 von 32) (Englisch, Französisch, Italienisch, Portugiesisch, Spanisch)

799214

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

- Raise the presser foot lifter, and press the presser foot locking lever.

󰀨

(Fig.3) (Fig.4)

Installing the presser foot

- Put the presser foot under the presser foot locking device, lower the

presser foot lifter, press the foot locking device to reset the foot, and

lift the presser foot lifter. (Fig.5) (Fig.6)

Caution

- 󰀨

remove foot pedal when replacement presser foot.

- When replace the presser foot please place the machine on stable

platform.

- 



Threading the sewing machine

Replacing the bottom bobbin

- 1. Slide the bobbin cover button to the right and remove the bobbin

cover (Fig.7)

- 2. Put the new bobbin in the holder, with the thread going clockwise.

Leave 10 cm of thread hanging out. (Fig.8)

- 3. Hold the end of the upper thread with one hand, and turn the hand

wheel counterclockwise with the other hand, the needle thread will

pick up the bobbin thread and pull it up through the hole under the

needle (Fig.9).

- 4. Replace the bobbin cover and separate the two threads and pull

them to the back of the machine under the presser foot, leaving about

15cm hanging there (Fig.10).

Caution

remove foot pedal when replacing bottom bobbin.

- Please use metal bobbins, otherwise the magnetic holder cannot tense

the bobbin thread and work rightly.

Sewing

- 1. Turn the hand Wheel conterclockwise to raise the needle to its

highest position.

- 2. Raise the foot lifter and place the fabric you want to sew under the

presser foot (Fig.11).

- 3. Lower the presser foot. (Fig. 12).

- 4. Rotate the pattern selection dial to select the stitch pattern you

wanted.

- 󰀨

switch and turn the hand wheel to raise the needle all the way up so it

doesn’t get stuck and bent.

- CAUTION: Changing the stitch pattern is not allowed when the ma-

chine is running; otherwise, the needle and/or machine may damage.

- 5. Turn the hand wheel counterclockwise several times to make sure

there is no jamming in the stitches.

- 6. Slide the power switch to the LOW or HIGH speed position and the

machine will automatically start sewing. We recommend the LOW

speed for beginners (Fig.13)

- 󰀨

turn the hand wheel to raise the needle all the way up, lift the presser

foot, and then gently remove the fabric from the sewing machine, and

cut the thread with the thread cutter. (Fig.14)

Usage tips

- 󰀩

then pull out the fabric gently.

- If the thread had tangled or jammed, please turn the hand wheel and

simultaneously pull the thread slightly to release the thread. Bottom

bobbin mechanism is a more precise part, inappropriate actions may



Features

1. Selection of stitch pattern

- Rotate the pattern selection dial to select the 16

stitch patterns you wanted.

- CAUTION: Before you change the stitch pattern,

󰀨

to raise the needle all the way up so it doesn’t get

stuck and bent.

- CAUTION: Changing the stitch pattern is not

allowed when the machine is running; otherwise, the

needle and/or machine may damage.

2. Reverse sewing

- When the machine is running, press down and

hold the reverse sewing button when you want to do

reverse sewing; release the button, the machine is

doing normal sewing.

3. Setting the sewing speed

- Slide the power switch to “I” or “II” position.

- I: Low speed

- II. High speed

4. Working lamp

- If additional light is needed, press the light switch

to turn the light “ON”. Press the switch again to turn

it “OFF”.

5. Thread cutter

- The machine has a thread cutter on the central left

󰀨

sewing or winding thread.

6. Sewing sleeves

- This sewing machine has been designed to sew

sleeves or any narrow openings in garment. Pull out

the drawer and position the garment over the sewing

arm if you want to sew the sleeves.

7. Manual buttonhole

- 1. Put the cloth under the presser foot and lower the presser foot on

the cloth where you need to sew buttonhole, then choose the 15th

stitch.

- 󰀨

switch (Fig.15).

- 3. Choose the 16th stitch, turn on switch and sew on the cloth in suit-

󰀨

straight line. (Fig.16)

- 4. Choose the 15th stitch, then turn on switch and sew 5-6 stitch in low

󰀨

- 5. Raise the presser foot, rotating the cloth for 180º (Fig.18)

- Choose the 16th stitch, then turn on switch and sew till buttonhole is

fully sewed. (Fig.19)

8. Drawer.

- This drawer is an accessory storage compartment, which can be slide

out and you can store spare bobbins, needles, etc. in it.

Solac SW8231 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info