Bedienungsanleitung Solis 8001 (Seite 28 von 34) (Deutsch, Englisch, Französisch)

708876

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

5554



BEFORE FIRST USE

 Remove and discard all packaging materials and potential advertisement stickers.

 Wipe the appliance chassis clean with a soft, slightly moist towel and dry it.

 Place the appliance on a dry, even and heat resistant work surface.

Note:

Before the toaster is used for the ﬁrst time, it is recommended that the roasting de-

gree controller (H) is set to the highest position and the toasting process is completed

once without toast/bread by pressing the TOAST/CANCEL button (A). The toaster

produces thin smoke and potentially a slight smell when used for the ﬁrst time. This

is absolutely normal and does not impair the functionality of your toaster in any way.

Make sure that the room is sufﬁciently ventilated.



STARTING UP

1. Plug the power plug into a suitable power outlet, the button surrounds of the

TOAST/CANCEL (A) buttons light up white. The LED bars for the toast status light

up red from left to right. Then, the bars only light up to the position which has

been set with the roasting degree controller (H). The toaster switches to standby

mode automatically after 30 seconds if no button is pressed and the roasting

degree controller (H) is not moved within this timeframe.

2. Place the bread, the slice of toast or the crumpet resp. bagel you wish to toast in

the slot. Make sure that the slices are not too thick, long or wide and precisely

ﬁt into the slots.

Your appliance is equipped with two independently functioning control

panels, allowing you to make separate settings for each pair of slots and

simultaneously perform different toasting processes.

3. Select the desired degree of roasting with the roasting degree controller (H). In

position 1, the roasting is lightest, in position 5, it is darkest. The LED bar (G) lights

up red up to the selected position.

Note:

When using the toaster for the ﬁrst time, you should start with roasting degree 3.

Different kinds of bread and personal preference might require different roasting

degree settings. For instance, the setting should be lower for light, ﬂuffy bread

than for bread with a ﬁrm texture. Likewise, older bread requires a lower degree of

roasting, as the bread is drier than fresh bread.

4. To start the toasting process, press the TOAST/CANCEL button (A) on the con-

trol panel. The button surround of the TOAST/CANCEL button lights up red and

the lift / lower mechanism automatically lowers the bread into the slots, centers

it and starts the toasting process. Once the bread has been lowered, the button

surround by LIFT AND LOOK™ (B) lights up white and the segment in the far

right of the LED bar (G) indicating the toasting status above the roasting degree

controller (H) starts ﬂashing. With the progress of the toasting process, the bar

shrinks segment by segment, moving to the left. The LIFT AND LOOK™ button

(B) illuminates until approx. 10 seconds before the end of the toasting process,

then it goes out, as the function can no longer be activated after this moment.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solis 8001 Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Solis 8001

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info