Bedienungsanleitung Solis 8001 (Seite 29 von 34) (Deutsch, Englisch, Französisch)

708876

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

5756



THE BUTTONS AND THEIR FUNCTIONS

 TOAST/CANCEL button (A)

Once the appliance is plugged in, the button surround of TOAST/CANCEL lights up

white for 30 seconds. After that, the appliance switches to standby mode if no other

button has been pressed resp. the roasting degree controller has not been moved.

 Press the TOAST/CANCEL button (A) once to start the mechanism for lowering

and centering and subsequently the toasting process. The button surround of

TOAST/CANCEL lights up red during the toasting process.

 If you press the TOAST/CANCEL button during the toasting process, the toast-

ing function resp. every other function is stopped and the lifting mechanism lifts

the bread. In this case, the colour of the button surround by TOAST/CANCEL

switches from red to white and remains illuminated white for 30 seconds until

the appliance switches to standby mode.

 LIFT AND LOOK™ button (B)

With this function, you can automatically lift the toast / pastry for a short time to

check the roasting degree without interrupting or stopping the toasting process.

1. The button surround of LIFT AND LOOK™ lights up white during the toasting

process resp. the extension phase (if you have pressed the A BIT MORE™ button).

As long as the button surround lights up white, you can lift the bread / pastry for a

few seconds and check the degree of roasting by pressing the LIFT AND LOOK™

button. The button surround ﬂashes during this phase. The segment to the far

right of the LED bar does not ﬂash in this phase and indicates that the set toasting

time is only counted down again after the bread is lowered. After a few seconds,

the bread / pastry is automatically lowered by the LIFT AND LOOK™ function,

the toasting process is resumed and the segment to the far right of the LED

bar ﬂashes again. Should the bread / pastry be brown enough, you can stop the

toasting process by pressing the TOAST/CANCEL button.

2. Approximately 10 seconds before the toasting process is completed, the white

button surround of LIFT AND LOOK™ goes out. The function can not be

activated anymore.

Note:

The toasting process can be interrupted at any time by a mere press of the

TOAST/CANCEL button. This stops the toasting process and activates the lifting

mechanism, the bread is lifted.

5. Once the toasting process has been completed and while the lifting mechanism

automatically lifts the bread, the button surround of the TOAST/CANCEL button

ﬂashes red. The LED bar (G) on the other hand does not ﬂash anymore, instead

it constantly illuminates up to the selected degree of roasting.

6. Once the toasting process has been completed and the bread has been fully lifted,

the Done-signal sounds. Now, remove the bread from the toaster. The button

surround by TOAST/CANCEL lights up white for 30 seconds, indicating that the

toaster is ready for the next toasting process.

Standby mode:

The toaster returns to standby mode after 30 seconds if no button is pressed

and the roasting degree controller (H) is not moved within this timeframe. In

standby mode, all button surrounds as well as the LED bar for toasting status

go out.

You can exit standby mode, making the button surrounds of TOAST/CANCEL

and the LED bar light up again, by:

 pressing one of the buttons other than the TOAST/CANCEL or

A BIT MORE. These buttons would start the toasting process right away,

 moving the roasting degree controller.

Warning:

Never leave the toaster unsupervised while it is in use, as there is always the risk of

the bread getting stuck in it and starting to burn. In the unlikely event of a toast,

bread or bagel being stuck in the slot, all button surrounds as well as the LED bar

start ﬂashing and the appliance switches off. In this case, pull the power plug from

the power socket and let the appliance cool down completely before removing the

bread from the slot with a wooden tool (e.g. a cooking spoon). Be especially careful

not to damage the heating elements when doing that.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solis 8001 Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Solis 8001

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info