Bedienungsanleitung Solis 8001 (Seite 30 von 34) (Deutsch, Englisch, Französisch)

708876

Zoom out

Zoom in

Vorherige Seite

1/34

Nächste Seite

5958

Note:

In any case, place the crumpet in the slots with the top side facing inwards, as indi-

cated by the engraved writing between the two slots.

Toasting bagels:

The CRUMPET/FRUIT BREAD function can be also used to toast bagels.

1. Place the bagels in the slots with the cut sides facing inwards, towards the en-

graved writing between the two slots.

2. To toast the bagels, press the CRUMPET/FRUIT BREAD button once, the but-

ton surround lights up white.

3. Select the desired degree of roasting by moving the roasting degree controller (H)

to the corresponding position. We recommend setting 1.

4. Press the TOAST/CANCEL button, the button surround lights up red. The bagels

are automatically lowered and centered, the heating elements on the insides of

the left resp. right slot pair are heated up according to the setting.

5. During the toasting process, the button surround of LIFT AND LOOK™ lights

up white, indicating that the toasting process can be checked and, if neces-

sary, stopped at any time. To check the roasting degree of the bagels press the

LIFT AND LOOK™ button, the bagels pop up for a few seconds. If the bagels

are sufﬁciently toasted, press the TOAST/CANCEL button to stop the toasting

process. Approximately 10 seconds before the toasting process is over, the but-

ton surround of LIFT AND LOOK™ goes out and the function can no longer be

activated.

6. When the toasting process stops and while the lifting mechanism is lifting up

the bagels, the button surround of TOAST/CANCEL ﬂashes red. The LED bar on

the other hand does not ﬂash, instead it lights up constantly up to the selected

roasting degree.

7. Once the toasting process has been completed and the bagels have been lifted up,

the Done-signal sounds. Remove the bagels, the button surround of TOAST/CAN-

CEL lights up white for 30 seconds to indicate that the appliance is ready for the

next toasting process. The button surround of CRUMPET/FRUIT BREAD remains

lit and needs to be pressed twice if another toasting process in the CRUMPET

function is not desired. Also, the button surround of CRUMPET/FRUIT BREAD

goes out after 30 seconds resp. if the power plug has been pulled.

 CRUMPET/FRUIT BREAD button (C)

With this button, you can select either the CRUMPET or the FRUIT BREAD function

to adjust the toasting time resp. the activated heating elements to the corresponding

pastry. You can select from crumpet or bagel within the CRUMPET function.

 CRUMPET setting (one-sided toasting for crumpets)

In the CRUMPET setting, only the heating elements on the insides of the left resp.

right slot pairs heat up to toast the tops of the crumpet while not toasting their

bottoms.

Toasting crumpets:

1. Place the crumpets in the slots with the top sides / cut sides facing inwards, to-

wards the engraved writing between the two slots.

2. To select the CRUMPET setting, press the CRUMPET/FRUIT BREAD button

once, the button surround lights up white.

3. Select the desired degree of roasting by moving the roasting degree controller (H)

to the corresponding position.

4. Press the TOAST/CANCEL button, the button surround lights up red. The crumpet

is automatically lowered and centered, the heating elements on the insides of the

particular slot pairs heat up according to the settings.

5. During the toasting process, the button surround of LIFT AND LOOK™ lights

up white, indicating that the toasting process can be checked and, if neces-

sary, stopped at any time. To check the roasting degree of the pastry press the

LIFT AND LOOK™ button, the pastry pops up for a few seconds. If the pastry

is sufﬁciently toasted, press the TOAST/CANCEL button to stop the toasting

process. Approximately 10 seconds before the toasting process is over, the but-

ton surround of LIFT AND LOOK™ goes out and the function can no longer be

activated.

6. When the toasting process stops and while the lifting mechanism is lifting up

the pastry, the button surround of TOAST/CANCEL ﬂashes red. The LED bar on

the other hand does not ﬂash, instead it lights up constantly up to the selected

roasting degree.

7. Once the toasting process has been completed and the pastry has been lifted up,

the Done-signal sounds. Remove the pastry, the button surround of TOAST/CAN-

CEL lights up white for 30 seconds to indicate that the appliance is ready for the

next toasting process. The button surround of CRUMPET/FRUIT BREAD remains

lit and needs to be pressed twice if another toasting process in the CRUMPET

function is not desired. Also, the button surround of CRUMPET/FRUIT BREAD

goes out after 30 seconds resp. if the power plug has been pulled.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Solis 8001 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Solis 8001

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info