Bedienungsanleitung Soundcraft M4 (Seite 17 von 48) (Englisch)

611445

Zoom out

Zoom in

Vorherige Seite

1/48

Nächste Seite

USER GUIDE

PROBLEM SOLVING

Basic problem solving is within the scope of any user if a few basic rules are followed.

• Get to know the Block Diagram of your console (see page 36).

• Get to know what all parameters and/or connection in the system are supposed to do.

• Learn where to look for common trouble spots.

The Block Diagram is a representative sketch of all the components of the console, showing how they

connect together and how the signal flows through the system. Once you have become familiar with the

various component blocks you will find the Block Diagram is quite easy to follow and you will have gained a

valuable understanding of the internal structure of the console.

Each Component has a specific function and only by getting to know what each part is supposed to do will

you be able to tell if there is a genuine fault! Many `faults’ are the result of incorrect connection or control

settings which may have been overlooked.

Basic Troubleshooting is a process of applying logical thought to the signal path through the console and

tracking down the problem by elimination.

• Swap input connections to check that the source is really present. Check both Mic and Line inputs.

• Eliminate sections of the channel by using the insert point to re-route the signal to other inputs that

are known to be working.

• Route channels to different outputs or to auxiliary sends to identify problems on the Master

section.

• Compare a suspect channel with an adjacent channel which has been set up identically. Use PFL

and AFL to monitor the signal in each section.

• Insert contact problems may be checked by using a dummy jack with tip and ring shorted together as

shown below. If the signal appears when the jack is inserted it shows that there is a problem with

the normalling contacts on the jack socket, caused by wear or damage, or often just dirt or dust.

Keep a few in your gig tool box.

If in doubt please contact Soundcraft customer support.

PRODUCTS UNDER WARRANTY

USA customers should contact the National Service Manager at Soundcraft USA.

Telephone: (818) 920 3212

UK customers should contact their local Dealer.

Outside the UK and USA, customers are requested to contact their territorial distributor who is able to offer

support in the local time zone and language. Please see the Distributor listings on our website

(http://www.soundcraft.com) to locate your Local Distributor.

OUT-OF-WARRANTY PRODUCTS

For out-of-warranty consoles purchased in the United Kingdom, please contact the Customer Services

Department (e-mail: soundcraft.csd@harman.com) at the factory in Potters Bar, Hertfordshire:

Telephone +44 (0)1707 665000.

For all other out-of-warranty consoles, please contact the appropriate territorial distributor.

When mailing or faxing please remember to give as much information as possible. This should include your

name, address and a daytime telephone number.

Should you experience any difficulty please contact Customer Services Department

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Soundcraft M4 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Soundcraft M4

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info