Bedienungsanleitung Spektrum DX8 (Seite 10 von 42) (Englisch)

708059

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite





The DX8 utilizes a roller that can be rotated or pressed and two buttons, Back and

Clear that are used to access and program all the functions.

Direct Model Access- From the main screen, you can access the Model Select

screen (used to change models) by pressing the BACK and CLEAR buttons

simultaneously.



The DX8 2.4 features advanced digital trims. The Main screen displays the

graphic position for the trims. The Throttle Aileron, Elevator, and Rudder trim

levers, and when activated the right and left trimmers, feature an audible center

trim beep and a pause. You can adjust the amount of travel per each trim in the

Trim Step Function, located in System Setup Mode. See page 16 for more details.

Note: When the transmitter is turned off, the trims and left and right

trimmer values are stored in memory and recalled when the system is

turned back on.



The DX8 features an inactivity warning that warns if the transmitter is left on

preventing draining the batteries. If the transmitter is left on and no input is given

to the sticks or switches for 10 minutes, an alarm will sound and warning screen

appear. Moving any stick or switch will clear the alarm. Normal RF modulation

continues throughout the alarm maintaining the RF link.



The DX8 features a No RF output warning. If the 2.4GHz band is full, it’s possible

that the DX8 may not be able to ﬁnd open channels when the transmitter is ﬁrst

turned on. If the transmitter ﬁnds no open channels a warning screen appears and

will remain until the transmitter is able to ﬁnd two open channels and transmit.



When the transmitter voltage drops below 4.3 volts, “Warning Low Battery” will

ﬂash and an alarm sound. If you are ﬂying when this occurs, land immediately.



The DX8 features programmable alarms that warn of a potential unsafe switch

or stick position when the transmitter is turned on. In Acro mode programmable

alarms include high throttle, gear and mid and land ﬂap positions while in

helicopter mode warnings include high throttle, Stunt 1, Stunt 2, and Hold. If

any of these switches or throttle stick position is in an unsafe position when the

transmitter is turned on, an alarm will sound, the screen will display the offending

switch position and the transmitter will not transmit a signal. Moving the switch

or stick to the desired position will clear the warning and normal operation will

resume. See page 18 for details on programming warnings.



The AR8000 full range 8-channel receiver features DSM2

™

technology and

is compatible with all Spektrum

™

and JR

aircraft radios that support DSM2

technology including: JR12X, 11X, X9503, X9303, Spektrum DX8, DX7, DX7se,

DX6i, DX5e and Module Systems.

Note: The AR8000 receiver is not compatible with the Spektrum DX6

parkﬂyer transmitter.



 

 

 

 

™



 

 

 

™



 

Press the ROLLER to access screens or functions

Rotate the ROLLER to adjust values or to select options

Note: Pressing the ROLLER for more than three seconds will

return to the main screen.

Press the CLEAR button to return the highlighted value to its default setting

Press the BACK button to return to the previous screen

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spektrum DX8 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spektrum DX8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info