Bedienungsanleitung Spektrum DX8 (Seite 16 von 42) (Englisch)

708059

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite





Press and hold the roller while turning on the transmitter. When System Setup

appears on the screen, release the roller. The DX8 is now in System Setup Mode.

Rotate the roller to highlight Swash Type then press the roller to access the

function. The following screen appears:

Highlight the current swashplate type then rotate the roller to select the desired

swashplate mix. When the desired Swashplate mix is displayed press the roller

to select. In Systems Settings highlight User Name then press the roller to select

that function. Select the desired mode then press to accept.



The Switch Select function allows the switches, left knob and right and left

trimmers to be assigned to functions, channel or inhibit. In helicopter mode the

following options are available:



Inhibit Gear

Aux 2, Aux 3





Inhibit Gear

Aux 2 channel Aux 3 channel



Gear Aux 2 channel Aux 3 channel

Throttle Pitch



Can be assigned to one of the following:

Inhibit Hover Pitch

Hover throttle Gyro trim

Governor trim Gear Channel

Aux 2 channel Aux 3 channel



Press and hold the roller while turning on the transmitter. When System Setup

appears on the screen, release the roller. The DX8 is now in System Setup Mode.

Rotate the roller to highlight the desired switch, knob or trimmer then press.

Select the channel or function you wish to assign. See chart for options. Press the

roller to accept. Note that a channel or function can only be assigned once.

Repeat to select all desired switch positions.



The F-Mode setup screen is used to assign the switches that will be used for

Flight Mode and Hold. Flight Mode setup is defaulted to Flight Mode -ﬂight

mode switch and Hold- Inhibited.

You can assign the ﬂight mode and hold functions to any of 9 switches including:

Inhibit, Aileron D/R, Elevator D/R, Rudder D/R, Gyro switch, Flight Mode Switch,

Hold and the Governor switch.



Press and hold the roller while turning on the transmitter. When System Setup

appears on the screen, release the roller. The DX8 is now in System Setup Mode.

Rotate the roller to highlight F-Mode Setup then press.

The following screen appears:

Highlight the Flight mode or Hold function then press to access that function.

Rotate the roller to select the desired switch.

TRIM STEP

The Trim Step function allows servo movement adjustment per click of trim. For

example you usually want a large trim step (8 to 10) for a new model. Each click

of trim will have a large amount of trim travel so you can quickly adjust an out-of-

trim model in ﬂight. Later you can use a ﬁner trim step (1-5) to adjust for precise

ﬂight. The Trim Step function allows the trims to be common or independent in

each active ﬂight mode. Many helicopter pilots use independent trims because

they are automatically active when a ﬂight mode is activated. Important: The

trim step function has no effect on the overall trim travel, only the total number of

clicks available. If you select a 0 value in trim step, the trim is turned off.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spektrum DX8 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spektrum DX8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info