Bedienungsanleitung Spektrum DX8 (Seite 7 von 100) (Englisch)

708059

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite



Rotate the roller to highlight the value at the bottom of the screen then press the

roller to access the Sub-Trim Value. Rotate the roller to adjust the Sub-Trim value for

the selected channel. Then press the roller to accept.



In the Reversing screen rotate the roller to highlight Reverse then press the roller.

Now rotate the roller until Travel appears. Press the roller to enter Travel function.

Highlight the channel then press the roller to access. Rotate the roller to select

the channel to adjust then press the roller to accept that channel.

Highlight the values at the bottom of the screen. When you center the

corresponding stick both values are highlighted and adjusted simultaneously.

Moving the stick or switch in the desired position allows you to independently

adjust that direction of travel. With the desired value (s) highlighted rotate the

roller to adjust the travel value for the selected channel. Then press the roller to

accept the value.

STEP #6



The Dual Rate and Exponential functions allow you to program up to three

control rates and select them independently or with a single switch. Dual Rates

and exponentials are available on the aileron, elevator and rudder channels.

Positive expo values reduce control sensitivity around center with no effect on

maximum travel. We recommend using positive values. Negative exponential

values increase sensitivity around neutral and are seldom used.



In the Function List rotate the roller to highlight D/R and Expo. Then press the

roller to access the D/R and Expo screen.



Rotate the roller to highlight the channel function then press the roller to select

the function. Next rotate the roller to select the aileron, elevator or rudder

channel. Then press the roller to accept that channel.



Rotate the roller to highlight SW (switch) at the bottom of the screen then press

the roller to access the switch options. Rotate the roller to select the desired

switch then press the roller to activate that switch.

 By assigning multiple channels to the same switch, you can use a single

switch to affect the dual and exponential rates of multiple channels.



Move the switch displayed at the bottom of the screen to change the Pos to

one of its three positions. When you make D/R or Expo adjustments, the values

assign and are automatically active when the switch is in that position (Pos 0,

1or 2).



Conﬁrm you have chosen the desired channel and selected the switch position.

Rotate the roller to highlight the D/R or Expo values then press the roller to

access that value. When you center the corresponding channel’s control stick,

both values are highlighted. Moving the control stick to its endpoint causes one

value to be highlighted. This allows the D/R or Expo value in that direction only

to be changed. With the desired value selected, rotate the roller to select the

desired D/R or Expo value.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spektrum DX8 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spektrum DX8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info