Bedienungsanleitung Spektrum DX8 (Seite 12 von 100) (Englisch)

708059

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite



Rotate the roller to highlight Servo Setup then press the roller to access the Servo

Setup screens. The Travel Adjust screen automatically appears. Use the roller to

access the Reverse option.

Turn roller to highlight channel. Press roller to access channel. Turn roller to

select option. Press roller to accept option.

Highlight the REV NOR Graphic at the bottom of the screen. Press the roller to

select REV or NOR.

Rotate the roller to highlight the channel function. Then press the roller to access

the function. Rotate the roller to select the next channel to reverse, then press the

roller. Repeat this process to complete reversing for all necessary channels.



In the Servo Setup screen rotate the roller to highlight Travel then press the roller.

Now rotate the roller until Sub-Trim appears, then press the roller to enter the

Sub-Trim function.

Rotate the roller to select the channel then press the roller to select that channel.

Rotate the roller to access the channel you want to adjust then press the roller to

accept that channel.

Rotate the roller to highlight the value at the bottom of the screen then press the

roller to access the Sub-Trim Value. Rotate the roller to adjust the Sub-Trim value

for the selected channel. Then press the roller to accept



In the Servo setup function, rotate the roller to highlight Travel then press the

roller to select the function.

Highlight the channel function then press the roller to access the function.

Rotate the roller to select the channel to adjust then press the roller to accept that

channel.

Highlight the values at the bottom of the screen and press the roller to select

them. When you center the corresponding stick both values are highlighted

and adjusted simultaneously. Moving the stick or switch in the desired position

allows you to independently adjust that direction of travel. With the desired value

(s) highlighted rotate the roller to adjust the travel adjust for the selected channel.

Then press the roller to accept the values.

STEP #6



In the Swashplate screen you can adjust the direction and amount of travel for

the aileron, elevator and pitch functions. To achieve the correct travel direction

for Aileron, Elevator and Pitch, ﬁrst use the reversing function (step #5 above)

to set the servo direction on the aileron, elevator and pitch channels. Set it so

that aileron input on the transmitter’s stick tilts the swashplate right and left, an

elevator input tilts the swashplate tilts forward and backward, and a pitch input

raises and lowers the swashplate.

Then in the Swashplate screen, you can adjust swashplate values positively or

negatively to achieve the overall correct travel direction for aileron, elevator and

pitch. An E-ring function also prevents servo over-travel when simultaneous

extreme aileron and elevator inputs are given. This screen also allows an Expo

function that smoothes out the effect of the servo’s rotation at extreme negative

and positive swashplate values. You should activate the Expo function.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spektrum DX8 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spektrum DX8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info