Bedienungsanleitung Spektrum DX8 (Seite 14 von 100) (Englisch)

708059

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite





Conﬁrm you have chosen the desired channel and selected the switch position.

Rotate the roller to highlight the D/R or Expo values then press the roller to

access the values. When you center the corresponding channel’s control stick,

both values are highlighted. Moving the control stick to its endpoint causes one

value to be highlighted. This allows the D/R or Expo value in that direction only to

be changed. With the desired value selected rotate the roller to select the desired

D/R or Expo value. Afterwards, press the roller to accept the values.

STEP #8



The DX8 features a ﬁve-point throttle curve with individual throttle curves for each

ﬂight mode. A graphic display at the left side of the screen aids in adjusting the

curves. Also, an Expo function is available that smoothes out the curve.



In the Function List rotate the roller to highlight Throttle Curve. Press the roller to

access that screen.

Highlight the desired ﬂight mode at the top of the screen then press the roller to

select. The selected ﬂight mode will darken conﬁrming your selection.

N= Normal

1= Stunt 1

2= Stunt 2

H= hold



Move the ﬂight mode switch in the position you wish to adjust. Rotate the roller

to highlight one of the ﬁve available throttle curve values (Low, 25%, 50%, 75%,

High). Press the roller to access that value. Rotate the roller to adjust the selected

point to the desired output position and press the roller to accept the value. Note

the position on the graph at the left of the screen.

Repeat this for all desired points.



Rotate the roller to highlight EXPO. Press the roller to toggle between the activate

and inhibit settings.

STEP #9



The DX8 features a ﬁve-point Pitch curve. You can assign the available four

individual pitch curves to ﬂight modes. A graphic display at the left side of the

screen aids in adjusting pitch curves. Expo is available and smoothes out the

curve.



In Function List rotate the roller to highlight Pitch Curve then press the roller to

accept the function.



Highlight the desired ﬂight mode at the top of the screen. Press the roller to

select. The selected ﬂight mode will darken conﬁrming the selection.

N= Normal

1= Stunt 1

2= Stunt 2

H= hold



Placing the ﬂight mode switch in the right position you wish to adjust does not

allow changes to that position. Highlighting it with the scroll wheel allows changes

to be made. Rotate the roller to highlight one of the ﬁve available throttle curve

values (Low, 25%, 50%,75%, High). Press the roller to access that value. Rotate

the roller to select the ﬂight mode position you wish to program and press the

roller to accept the ﬂight mode. Note the position on the graph at the left of the

screen.

Repeat this for all desired points.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Spektrum DX8 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Spektrum DX8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info