Bedienungsanleitung Stanley FME720 (Seite 14 von 152) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

622174

Zoom out

Zoom in

Vorherige Seite

1/152

Nächste Seite

ENGLISH

(Original instructions)

Changing blades (g.O - Q)

Warning! To avoid injury from accidental starting, always

remove the power plug from the power source before chang-

ing the blades. Use correctly sharpened saw blades. Observe

the maximum speed and tooth type marked on the saw blade.

Only use Stanley Fat Max recommended blades. To replace

the saw blade (34), proceed as follows:

u Press the saw arm release lever (36) and rotate the move-

able lower guard counter clockwise and clear of the blade.

Use one hand to hold the guard in place (g. O).

u Using a screwdriver, loosen but do not remove the screw

(50). Do not remove the screw completely as this will

make re-assembly difcult.

u Using a screwdriver, loosen but do not remove the screw

(51) until there is movement in the metal guard plate.

Do not remove the screw completely as this will make

re-assembly difcult.

u Move the metal upper guard plate counter clockwise (g.

P). This will give you access to the spindle bolt (52) that

attaches the saw blade (34) to the mitre saw.

u Press and hold the spindle lock button (35) on the motor

housing, to lock the saw blade (34) and prevent it from

rotating.

u Using the supplied blade spanner, turn the spindle bolt

(52) in a clockwise direction to remove the bolt and the

saw blade (34).

u Fit a replacement blade, make sure that the teeth are

pointing downward and the direction marking on the blade

is the same as that on the mitre saws guard (clockwise)

(g. P).

u Loosely t the spindle bolt (52) by hand (turn counter

clockwise).

u Press and hold the spindle lock button (35) and use the

blade spanner to tighten the spindle bolt (52) until the

blade is secure.

u Replace the metal upper guard (26) into its original posi-

tion and tighten the two screws (50 and 51).

u Allow the moveable lower guard (5) to return to its original

position covering the blade.

Warning! Never press the spindle lock while the blade is

rotating. Be sure to hold the guard bracket down and rmly

tighten the guard bracket screw after installing the blade.

Warning! The guard bracket must be returned to its original

position and the screw tightened before activating the saw.

Failure to do so may allow the guard to contact the spin-

ning saw blade resulting in damage to the saw and severe

personal injury.

Accessories

The performance of your tool depends on the accessory used.

Stanley Fat Max accessories are engineered to high quality

standards and designed to enhance the performance of your

tool. By using these accessories you will get the very best

from your tool.

Maintenance

Your tool has been designed to operate over a long period of

time with a minimum of maintenance. Continuous satisfactory

operation depends upon proper tool care and regular cleaning.

u Regularly clean the ventilation slots with a clean, dry paint

brush.

u To clean the tool, use only mild soap and a damp cloth.

Never let any liquid get inside the tool and never immerse

any part of the tool into liquid.

Warning! Before carrying out any maintenance, make sure

that the tool is switched off and unplugged.

Mains plug replacement (U.K. & Ireland only)

If a new mains plug needs to be tted:

u Safely dispose of the old plug.

u Connect the brown lead to the live terminal in the new

plug.

u Connect the blue lead to the neutral terminal.

Warning! No connection is to be made to the earth terminal.

Follow the tting instructions supplied with good quality plugs.

Recommended fuse: 13 A.

Protecting the environment

Separate collection. This product must not be

disposed of with normal household waste.

Should you nd one day that your Stanley Fat Max product

needs replacement, or if it is of no further use to you, do not

dispose of it with household waste. Make this product avail-

able for separate collection.

Separate collection of used products and packag-

ing allows materials to be recycled and used again.

Re-use of recycled materials helps prevent

environmental pollution and reduces the demand

for raw materials.

Local regulations may provide for separate collection of elec-

trical products from the household, at municipal waste sites or

by the retailer when you purchase a new product.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley FME720 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info