Bedienungsanleitung Stanley STPT0900 (Seite 6 von 11) (Englisch)

720714

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

ENGLISH

(Original instructions)

Electrical safety

This tool is double insulated; therefore no earth

wire is required. Always check that the power

supply corresponds to the voltage on the rating

plate.

• This appliance is not intended for use by young or inﬁrm

persons without supervision. Children must be

supervised to ensure they do not play with the appliance.

• If the supply cord is damaged, it must be replaced by the

manufacturer or an authorised STANLEY Service Centre

in order to avoid a hazard.

Residual risks

Additional residual risks may arise when using the tool which

may not be included in the enclosed safety warnings. These

risks can arise from misuse, prolonged use etc.

Even with the application of the relevant safety regulations

and the implementation of safety devices, certain residual

risks cannot be avoided. These include:

• Injuries caused by touching any rotating/moving parts.

• Injuries caused when changing any parts, blades or

accessories.

• Injuries caused by prolonged use of a tool. When using

any tool for prolonged periods make sure you take

regular breaks.

• Impairment of hearing.

• Health hazards caused by breathing dust developed

when using your tool (example:- working with wood,

especially oak, beech and MDF).

Features (Fig. 1)

A. Trigger Switch

B. Main Handle

C. Secondary Gripping Handle

D. Adjustable Shoe Screws

E. Adjustable Shoe

F. Blade Clamp

Assembly and Adjustment

Warning: CUT HAZARD. Turn off and

disconnect tool from power source before

making any adjustments or removing or

installing attachments or accessories.

Warning: Hold saw ﬁrmly with both hands for all

cutting operations.

Warning: Inspect work area for hidden electrical

wiring, gas pipes or water pipes before making

blind or plunge cuts. Failure to do so may result

in electrica lshock, ﬁre, explosion, or property damage.

Warning: CUTHAZARD. Blade breakage may

occur if the blade does not extend past the shoe

and the workpiece during the cut. Increased risk

of personali njury, as well as damage to the shoe and

workpiece may result.

Warning: ALWAYS use safety glasses.

Everyday eyeglasses are NOT safety glasses.

Also use face or dust mask if cutting operation is

dusty. ALWAYS WEAR CERTIFIED SAFETY EQUIPMENT.

Warning: CUT HAZARD. Before cutting any type

of material, be sure it is ﬁrmly anchored or

clamped to prevent slipping.

• Switch on saw motor before applying pressure.

• Place blade lightly against work to be cut.

Warning:CUT HAZARD. Never hold and use

the product with your ﬁngers wrapped around

shoe adjustment button. Always hold saw ﬁrmly

with both hands while cutting as shown in Figure 2.

Whenever possible, the saw shoe must be held ﬁrmly

against the material being cut. This will prevent the saw from

jumping or vibrating and minimize blade breakage.

Variable speed switch (ﬁg.3)

The variable speed trigger switch will give you added

versatility. The further the trigger is depressed the higher the

speed of the saw. To turn the tool “OFF” release the trigger.

Warning: CUTHAZARD. This tool has no

provision to lock the switch in the ON position,

and should never be locked in the ON position by

any other means.

Blade installation and removal(ﬁg.4)

Warning: CUT HAZARD. Turn off and

disconnect tool from power source before

making any adjustments or removing or

installing attachments or accessories. The blade should

extend past the shoe and the thickness of the workpiece

during the cut. Select the blade best suitable for the material

to be cut and use the shortest blade suitable for the

thickness of the material. Do not use jigsaw blades with this

tool.

Warning: CUT HAZARD. Blade breakage may

occur if the blade does not extend past the shoe

and the workpiece during the cut. Increased risk

of personal injury, as well as damage to the shoe and

workpiece may result.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stanley STPT0900 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info