720714
8
Zoom out
Zoom in
Vorherige Seite
1/11
Nächste Seite
8
ENGLISH
(Original instructions)
Project tips
Cut only with sharp blades; they cut cleaner, faster and
put less strain on the motor while cutting.
When cutting, always ensure that the shoe is held firmly
against the workpiece and the workpiece is secured from
moving/deflecting. This will improve operator control and
minimize vibration.
For longer blade life, use bi-metal blades. These utilize a
carbon steel back welded to high speed steel teeth
making the blade more flexible and less prone to
breaking.
Accessories
This saw will accept up to a 12 inch long blade. Always use
the shortest blade suitable for your project but long enough
to keep the blade cutting through the material. Longer
blades are more likely to be bent or damaged during use.
During operation some longer blades may vibrate or shake if
the saw is not kept in contact with the workpiece.
Warning: Since accessories, other than those
offered by STANLEY, have not been tested with
this product, use of such accessories with this
tool could be hazardous. To reduce the risk of injury, only
STANLEY recommended accessories should be used with
this product.
Maintenance
Your STANLEY tool has been designed to operate over a
long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper tool
care and regular cleaning.
Warning! Before performing any maintenance, switch off
and unplug the tool.
Regularly clean the ventilation slots in your tool using a
soft dry brush or dry cloth.
Regularly clean the motor housing using a clean damp
cloth. Do not use any abrasive or solvent-based cleaner.
Service Information
STANLEY offers a full network of company-owned and
authorized service locations throughout Asia. All STANLEY
Service Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool
service.Whether you need technical advice, repair, or
genuine factory replacement parts, contact the STANLEY
location nearest to you.
Notes
STANLEY's policy is one of continuous improvement to
our products and, as such, we reserve the right tochange
product specifications without prior notice.
Standard equipment and accessories may vary by
country.
Product specifications may differ by country.
Complete product range may not be available in all
countries. Contact your local STANLEY dealers for range
availability.
Technical data
Specification STPT0900
Power W 900
Voltage V 220-240
Frequency Hz 50/60
No-load Speed /min 0-3200
Weight Kg 3.2
8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Stanley STPT0900 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info