Bedienungsanleitung Stiga 740 WX - P 901 CH (Seite 161 von 588) (Alle Sprachen)

608664

161

Zoom out

Zoom in

Vorherige Seite

1/588

Nächste Seite

6.16 QUICK-RELEASE SUPPORTS

These support allows the user to swap

from one attachment to another quickly

and easily.

The quick-release supports allow the user to move

the cutting means assembly quickly and easily

between two positions, i.e.:

• Normal position with the belt fully tensioned.

• Positioned 4 cm behind the normal position,

with the belt slackened, so that the cutting

means assembly moves closer to the base of

the machine.

Being as the belt tensioner is released from the

belt, the quick-release supports simplify belt and

cutting means assembly replacement, and also

make shifting to the washing position and service

positions easier.

Belt tension releasing (17; 18)

See also the instructions provided with

the attachment and with the quick-rele-

ase support.

1. Remove the cotter pins or lock pins (17:C)

from both sides.

2. Open the quick-release supports by pressing

on their rear sections with your heel (17:A)

Once the quick-release supports

have been opened, the arms of the at-

tachment are free and no longer secu-

red to the hook-up device.

     

operation, replace the arms on the sup-

port and reclose.

1. Carry out the necessary corrective action,

e.g.:

• Release the belt.

• Replace the attachment by unhooking the arms

(19).

Tensioning the belt (17; 18)

First tension one side and then the other accor-

ding to the instructions provided below.

Do not turn the lever using your hands.



1. Place your foot on the lever (18:A) and care-

fully turn it 180° forwards.

2. Install the cotter pin or lock pin (17:C).

3. Repeat the operation on the other side.

7 START-UP AND OPERATION

7.1 PRECAUTIONS FOR USE

Always make sure the engine oil level

is correct. This is particularly important

when operating on slopes (see 7.4).

Pay attention when mowing on slopes:

avoid abrupt starts and stops, do not

run the machine transversally to the

slope but run from top to bottom and

vice versa.

Apply the parking brake when you park

the machine.

The machine may not be driven on slo-

pes greater than 10º in any direction.

Reduce the speed on slopes and when

making sharp turns in order to retain

control of the machine and reduce the

risk of overturning.

Do not turn the steering wheel to full

lock when driving at full speed. The ma-

chine may overturn.

Keep hands and feet well away from the

-



7.2 COMBINED USE OF ACCESSORIES

For the combined use of accessories,

please refer to the "TABLE FOR THE

CORRECT COMBINATION OF ACCES-

SORIES" in section "0 TECHNICAL

DATA TABLE"

7.3 REFUELLING

Always use lead-free petrol only. DO



For the capacity of the fuel tank, please refer to “0

TECHNICAL DATA TABLE” The transparency of

the tank allows the user to check the level easily.

NOTE! Petrol is perishable and should

not remain in the tank for more than 30

days.

It is possible to use ecological fuels, i.e. alkylate

petrol. The composition of these petrols is less

harmful to people and the environment.

No negative eects linked to use of the same

have been reported. However, there are types

of alkylate-based petrol available on the market

ENGLISH

(Translation of the Original Instructions)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stiga 740 WX - P 901 CH Seite 161

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info