Bedienungsanleitung Stiga PARK COMFORT (Seite 7 von 16) (Englisch)

575797

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

ENGLISH

pressed position.

Depress the brake pedal fully. Move the

inhibitor to the right and then release the

brake pedal.

The parking brake is released by pressing the brake

pedal. The spring-loaded inhibitor slides to one

side.

Make sure that the parking brake is released when

operating the machine.

5. DRIVE PEDAL

A pedal that activates the variable transmission.

1. Depress the pedal with the

ball of your foot – the machine

moves forwards.

2. No load on the pedal – the ma-

chine is stationary.

3. Depress the pedal with your

heel – the machine reverses.

The drive pedal regulates the speed. The more

pressure applied, the faster the machine will move.

6. ADJUSTABLE STEERING WHEEL

The height of the steering wheel is infinitely ad-

justable. Undo the adjustment knob on the steering

column and raise or lower the steering wheel to the

desired position. Tighten.

Do not adjust the steering wheel during opera-

tion.

7. THROTTLE/CHOKE CONTROL

A control for setting the engine speed and to choke

the engine when starting from cold. (The latter

does not apply to Royal-Pro16-Pro20 which have

separate choke control – see item 8).

1. Choke – for starting a cold engine. The

choke is located in top of groove (does not

apply to Royal-Pro16-Pro20). Avoid op-

erating the machine in this position, taking

care to move the control to full throttle

(see below) when the engine is warm.

2. Full throttle – when the machine is in

operation, full throttle should always be

used.

3. Idling.

8. CHOKE CONTROL

(Royal - Pro16 - Pro20)

A pull-type control to choke the engine when start-

ing from cold.

1. Control fully pulled out – choke valve

in carburettor closed. For starting cold en-

gine.

2. Control pushed in – choke valve open.

For starting warm engine and when oper-

ating the machine.

Never operate the machine with the choke

pulled out when the engine is warm.

9. IGNITION LOCK/SPOTLIGHT

Ignition lock used for starting/stopping the engine.

Also includes switch for spotlight (Senator does

not have a spotlight). Four positions:

1. Stop position – the engine is short-

circuited. The key can be removed.

2. Operating position – spotlight activat-

ed.

3. Operating position – spotlight not acti-

vated.

4. Start position – the electric start motor

is activated when the key is turned to the

spring-loaded start position. Once the en-

gine has started, let the key return to oper-

ating position 3.

To turn on the spotlight, turn the key to position 2.

NOTE! If the key is turned from the stop posi-

tion to operating position 2, the spotlight is acti-

vated. This uses up battery power. Do not leave

the machine with the key in position 2 (applies

to Pro16-Pro20).

10. POWER TAKE-OFF

A lever for engaging and disengaging the power

take-off for operating front-mounted accessories.

Two positions:

1. Lever in forward position – power take-

off disengaged.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stiga PARK COMFORT Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stiga PARK COMFORT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info