Bedienungsanleitung Stiga PARK COMFORT (Seite 8 von 16) (Englisch)

575797

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

ENGLISH

2. Lever in backward position - power

take-off engaged.

11. POWER TAKE-OFF (Pro20)

Switch for engaging/disengaging the electromag-

netic power take-off for operating front-mounted

accessories. Two positions:

1. Press the front part of the switch – the

power take-off is engaged. The symbol

will light up.

2. Press the rear part of the switch – the

power take-off is disengaged.

12. DIFFERENTIAL INHIBITOR

(Pro16 - Pro20)

Lever for engaging the differential inhibitor. This

improves the towing capacity by locking the rear

wheels so that both wheels drive simultaneously.

Two positions:

1. Forward position – the differential in-

hibitor is not engaged. For normal opera-

tion.

2. Lever in backward position - differen-

tial inhibitor engaged. Works for both for-

ward and reverse drive.

The differential inhibitor is of greatest use when

the rear wheels are unevenly loaded. For example

when turning sharp corners where the inner rear

wheel bears a lesser load.

When driving during the winter on slippery surfac-

es, the drive capacity is improved if snow chains

are not used.

When the differential inhibitor is engaged, the

steering is heavy. Avoid turning the steering

wheel!

13. HOUR COUNTER

Indicates the number of working hours. Only

works when the engine is running.

14. CRUISE CONTROL

(Royal - Pro16 - Pro20)

A switch for activating the cruise control. The

cruise control allows the drive pedal (5) to be

locked in the desired position.

1. Press down the drive pedal until the de-

sired speed is obtained. Then press the

front part of the switch to activate the

cruise control. The symbol will light up.

2. Disengage the cruise control by braking

or pressing the rear part of the switch.

15. CUTTING HEIGHT ADJUSTMENT

(Royal - Pro16 - Pro20)

The machine is equipped with a control for using

the cutting deck with electrical cutting height ad-

justment (available as an accessory).

The switch is used to adjust the cutting

height in continuously variable positions.

The contact used for connecting the cutting deck is

mounted on the right side, in front of the front

wheel (fig. 2).

16. REAR RAKE (Pro20)

The machine is fitted with a control for electrical

adjustment of a rear rake (available as an accesso-

ry).

The switch is used to raise and lower the

rear rake.

Cables for connecting the rear rake are found at the

rear of the machine, to the left of the upper side of

the bumper. (Pro16 is prepared for a rear rake, ca-

bles routed).

17. SAND SPREADER (Pro20)

The machine has been designed for electrical ad-

justment of a sand spreader (available as an acces-

sory).

The switch is used to start and stop the

spreader.

The contact for connecting the sand spreader is

found at the rear of the machine, to the left of the

upper side of the bumper. (Pro16 is prepared for a

sand spreader, cables routed).

18. DISENGAGING LEVER

A lever for disengaging the variable transmission.

Enables the machine to be moved by hand without

the help of the engine. Two positions:

12V

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stiga PARK COMFORT Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stiga PARK COMFORT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info