Bedienungsanleitung Stiga PARK COMFORT (Seite 9 von 16) (Englisch)

575797

Zoom out

Zoom in

Vorherige Seite

1/16

Nächste Seite

ENGLISH

1. Lever moved back – transmis-

sion engaged for normal opera-

tion.

2. Lever moved forward – trans-

mission disengaged. The ma-

chine can be moved by hand.

The machine may not be towed over long distances

or at high speeds. The transmission could be dam-

aged.

19. FUEL GAUGE/FUEL CAP

Fuel cap with built-in fuel gauge that indi-

cates how much fuel there is in the fuel

tank (applies to Royal-Pro16-Pro20).

Comfort and President have a fuel cap without a

fuel gauge.

The fuel tank holds approx. 11.5 litres.

AREAS OF USE

The machine may only be used for the following

tasks using the genuine STIGA accessories stated.

1. Mowing

Using cutting deck 13-2939 (92M), 13-2927/

13-2935 (107M), 13-2951/13-2952 (107 M

HD), 13-2915/13-2921 (121M), 13-2936/13-

2937 (125 Combi Pro) or flail mower 13-1977.

2. Sweeping

Using brush unit 13-1933 or collector brush

unit 13-1939. Use of dust guard 13-1936 is rec-

ommended with the first option.

3. Snow clearance

Using snow blade 13-0918 or snow thrower 13-

1948. Snow chains 13-0936 (16“)/13-0937

(17“) and frame weights 13-0923 are recom-

mended.

4. Grass clipping and leaf collection

Using towed collector 13-1978 (30") or 13-

1950 (42").

5. Grass and leaf transport

Using dump cart 13-1979 (Standard), 13-1988

(Maxi) or 13-1992 (Combi).

6. Sand spreading

Using sand spreader 13-1975. Can also be used

for spreading salt. Snow chains 13-0936 (16“)

13-0937 (17“) and frame weights 13-0923 rec-

ommended.

7. Weeding on gravel paths

Using front mounted hoe 13-1944 and rear-

mounted rake 13-1969.

8. Lawn edge trimming

Using edge trimmer 13-0905.

9. Moss scarification

Using moss scarifier 13-1984.

The maximum vertical load on the towing hitch

must not exceed 100 N.

The maximum over-run load on the towing hitch

from towed accessories must not exceed 500 N.

NOTE! Before using a trailer – contact your insur-

ance company.

NOTE! This machine is not intended to be driven

on public roads.

STARTING AND OPERATION

ENGINE CASING

To inspect and maintain the engine and battery, re-

move the engine casing. Dismantling:

1. Unscrew the fuel cap/fuel gauge.

2. Pull up the rubber strap at the front edge of the

casing (fig. 8).

3. Carefully lift off the engine casing (fig. 9).

Assembly:

1. Place the casing over the lip on each side.

2. Make sure that the pins on the rear edge of the

casing go down into the respective holes (fig.

10).

3. Secure the front edge of the casing with the rub-

ber strap (fig. 8).

4. Finally, screw in the fuel cap/fuel gauge.

The machine may not be operated un-

less the engine casing is mounted. Risk

of burns and crushing injuries.

FILLING THE FUEL TANK

Always use lead-free petrol. You must never use 2-

stroke petrol mixed with oil.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stiga PARK COMFORT Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stiga PARK COMFORT

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info