Bedienungsanleitung Stokke Tripp Trapp (Seite 11 von 20) (Englisch, Französisch, Spanisch)

626079

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

• Follow the manufacturers instructions

• Do not leave child unattended

• The Tripp Trapp® Baby Set™ should only be used with

the seat plate in the rst groove from the top of the chair.

• Always use the restraint system when the seat is in one

of the top 3 grooves

• The harness must always be used and correctly tted –

most injuries from high chair are caused by falls

• Always keep child in view

• Stay in reach of your child.

• Do not use the chair unless all components are

correctly tted and adjusted. Pay special attention to

the seat and foot plate – make sure these are properly

fastened before you put your child into the chair.

• Do not place the chair near an open re or other

sources of strong heat, such as electric bar res, gas

res etc due to the risk of re.

• Always place the chair on a level stable surface and

make sure that the chair has space to slide backwards.

• Position the high chair away from solid structures and

benches to avoid injuries caused by falls and by access

to dangerous items.

• Position the high chair away from furniture, walls, hot

surfaces and liquids, window covering cords and

electrical cords and position the high chair away from

furniture when the chair is not being used at a table

with a tray removed.

•

Do not use any accessories or replacement parts not

manufactured by STOKKE®; this may aect your child’s

safety.

• Do not use the chair if any part is broken, torn or missing.

• Do not use the chair before the child can sit up by itself.

• Do not elevate the high chair on any structure or table.

• Do not use the chair as a step stool.

• Do not use with a booster seat

•

TRIPP TRAPP® is intended for use when your child is

capable of sitting upright unassisted (approximately 6

months)

• Front of footrest not to exceed front legs of chair at

oor level

• NEVER use the Tripp Trapp® chair without any glider.

• Remember to retighten all screws 2-3 weeks after

assembly of the chair. After that you should check on

and retighten the screws if necessary on a regular basis,

e.g. every second month. Keep the Allen key for future

use, but out of the childs reach.

• If the chair is used with a tray, the tray is not designed

to hold the child in the chair.

Rough surfaces (uneven oors ), for instance rugs and tiles

To prevent the Tripp Trapp® chair from tilting when pushed backwards,

it has plastic gliders underneath the legs. Their function is to enable

the chair to slide backwards and return to an upright position when

pushed backwards. To make sure that the gliders function as intended,

the chair should be placed on a surface enabling the chair to slide

backwards. Thus, the surface should be level, stable and with a certain

hardness. Uneven and/or rough surfaces, for instance some tiled oors,

and rugs/carpets that are soft or with long loose ends, are generally

unsuitable for chairs used by toddlers. Although the Tripp Trapp® chair

is recognized for its stability, these conditions also apply here.

The gliders as well as the oor must be kept clean.

To further increase the backward stability of the Tripp Trapp® highchair,

a replaceable, extended rear glider (“Extended Glider”) has been devel-

oped for the Tripp Trapp® highchair. For the period when the chair

is used with a harness or the Tripp Trapp® Baby Set, we recommend

that you always use it with the Tripp Trapp® Extended Glider. This is

especially important if the chair is placed on a soft carpet and/or at a

table where the child can push against a frame underneath the table-

top with its feet.

Warning

NEVER let your child

play around the

Tripp Trapp® chair

if it is not in the

intended position

for use.

Table

Be aware of the risk that a big frame under

the table top makes it easier for children

to push their legs against the table and tilt

backwards. Also note that Tripp Trapp® is

designed for dining tables

28-30” (72-76cm) high.

Warning

When the footrest is

positioned close to

the metal rod, there

will be a small gap

between the inside

of the chair legs and

the metal rod. This

is perfectly normal.

Never try to use

excessive force to make the metal rod touch

the side legs of the chair as this can cause

damage to the chair and/or make it unstable.

Footrest

Make sure the forward edge of the footrest

NEVER exceeds the front tip of the chair legs

at oor level. This may cause the chair to be

unstable when a child climbs in and out of

the Tripp Trapp® chair.

WARNING!

Prevent serious injury or death from falls or sliding out

11AU/NZ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stokke Tripp Trapp Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stokke Tripp Trapp

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info