Bedienungsanleitung Stokke Tripp Trapp (Seite 12 von 20) (Englisch, Französisch, Spanisch)

626079

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

READ CAREFULLY BEFORE ASSEMBLING

YOUR TRIPP TRAPP® CHAIR.

On the fold out page of this user guide you will nd

pictures that describe the assembly of your Tripp Trapp®

chair and Tripp Trapp® Baby Set. The Baby Set should only

be used with the seat plate in the rst groove from top

of the chair.

Parts

10 Metal screws • 6 Metal nuts • 1 Allen Key • 2 Curved backrests

2 Metal cross bars • 1 Wooden base cross bar • 1 Seat • 1 Foot-

rest • 2 Legs

1. Attach the base cross bar to the legs (grooves face

inside). Important to insert the shallow end of nut rst!

2. Insert screws and tighten rmly.

3. Attach the two metal crossbars and tighten loosely

4. Attach the two curved back rests. Insert metal nut with

shallow end rst and tighten loosely. NOTE: Backrest

with strap goes into bottom slots.

5. Slide seat and footrest into slots, with straight edge

facing forward. Make sure the height and depth of the

seat and footrest suit the size of your child (see instruc

tions for seat and footrest adjustments in this user

guide).

6. Place the chair on a level surface. Finally tighten

all screws rmly in the order given.

SEAT AND FOOTREST ADJUSTMENT

It is important to adjust the depth and height of the seat

and footrest to t the size of your child. See illustrations

on the fold out page, and description below. The settings

of the seat and footrest should be checked as the child

grows – at least once a year!

The seat plate and the footrest must be supported by

the full length of the grooves on the sides (not half way

supported).

Seat placement

Height – The seat is set at the correct height when your

child’s elbows are level with the table top.

Depth – For correct depth of the seat, position the child’s

back against the backrest with the seat supporting ¾

of the thighs. For the child’s best comfort it is important

that the seat depth is not too deep. Leave comfortable

space between the front edge of the seat and back of the

child’s knee.

For a child 6-8 months it may amaze you how small seat

they actually need! The seat plate should not protrude

more than 1½-2” (4-5cm) in front of the chair side legs.

Footrest placement

Height – The footrest is set at the correct height when

the sole of the child’s foot can rest at on the footrest,

while the thighs are touching the seat.

Depth – Make sure the forward edge of the footrest

NEVER exceeds the front tip of the chair legs at oor level

Table of age and approxmate adjustment

This table is a rough guide for the height adjustment of

seat and footrest according to the age of you child. Child

dier in size according to age, so always make sure that

your child is seated correctly according to the instruc-

tions given in this user guide.

*) Use footrest as seat. Therefore seat is not applicable.

RESTRAINT SYSTEM OPERATION

Always use the restraint system when the seat is in the

1st, 2nd or 3rd grooves from the top. Place child in seat.

Pull each arm through the loop formed by the shoulder

and waist strap, and place in child’s lap. Crotch strap

comes up between child’s legs. Attach each shoulder

strap to the crotch strap. Adjust length of shoulder, waist

and crotch strap to restrain child in seat. Crotch strap

length should be adjusted so that connector is at waist

height.

The restraint system can be removed when your child has

reached the age of 36 months AND is able to sit safely

on TRIPP TRAPP®. Use a tool to remove the clip under the

seat plate to detach the crotch strap. Use a screwdriver to

detach the rest of the harness from the backrest.

Product information: The chair is made of cultivated

beech wood. The varnish contains no harmful sub-

stances, and the liberation of formaldehyde from the

varnish complies with E1 requirements.

Safety approval: Tripp Trapp® chair complies with AS

4684:2009 and ASTM F404-14 in combination with Tripp

Trapp® Baby Set™. Tripp Trapp® chair complies with AS

4684:2009 and EN 14988:2006+A1:2012 in combination

with Tripp Trapp® Newborn Set.

CLEANING AND MAINTENANCE

Wipe with a clean damp cloth, wipe o excess of water

with a dry cloth. Moisture will crack stain. We do not rec-

ommend the use of any detergent or micro bre cloth.

Colours may change if the chair is exposed to the sun.

AGE SEAT FOOTREST

6 months 1 5

1 1/2 year 2 6

3 year 2 8

7 year 3 11

10 year 4 14

Teen/ Adult n.a. 4-5*

Tripp Trapp® Cushion

Comes in several colours

and designs. It ts your Tripp

Trapp® chair both with and

without Tripp Trapp® Baby

Set.

Tripp Trapp® Babyset

Babyset intended for

children from 6 months

and up to 36 months.

Accessories

12 AU/NZ

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Stokke Tripp Trapp Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Stokke Tripp Trapp

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info