Bedienungsanleitung Strong SRT 7300 CI plus (Seite 16 von 23) (Englisch)

568532

Zoom out

Zoom in

Vorherige Seite

1/23

Nächste Seite

PART 1 • English

English

to a digital surround ampliﬁer. The digital output can be switched off by setting

Digital Audio to Off.

Video Format: This setting is only active when the receiver is connected to the TV set via

HDMI. It allows you to set the preferred HDMI screen resolution. Available

options depend from your TV set.

Once all settings are made, press EXIT to leave the Output Options menu. A conﬁrmation banner will be

shown. Press OK to save your settings or EXIT to discard.

7.2.3 Time Setting

This menu allows you to set the way the receiver collects and adjusts the time. You can also adjust the Auto

Power Down function here. Use pq to highlight the setting you wish to change and tu or [0~9] to change

the value of the highlighted setting. Press OK for a list with all available options for the chosen setting.

Time Display: Deﬁnes when the front panel display will show the clock. Possible settings are:

Off and Stand-by only.

Use GMT: On: the receiver will use broadcast time. Use the Time Zone setting to deﬁne

the deviation from GMT time. Summer Time can be set to On or Off.

Use GMT: Off: Allows you to enter the time settings manually. Use the [0~9] buttons to set

the current time in the Local Time option. Use pq to move the highlight to

Local Date and press OK. A calendar will be displayed. Use pqtu to select

the actual date and press GREEN to conﬁrm.

Auto power down

Auto Power Down is a new, power saving feature that helps you with reducing power consumption. It will

switch off the receiver when no command is given for at least the set time. Possible settings are: 1~6

hours with one hour steps and Disabled.

Once all settings are made, press EXIT to leave the Time Setting menu. A conﬁrmation banner will be

shown. Press OK to save your settings or EXIT to discard.

7.2.4 Parental Control

In this menu you can enable or disable the menu lock function and change the PIN code. Use pq to

highlight the setting you wish to change and tu or [0~9] to change the value of the highlighted setting.

Menu Lock: If Menu Lock is set to Enabled, items in the Main Menu are only accessible after

entering the PIN. (Default PIN: 0000) When set to Disabled, all menu items are

freely accessible.

Change PIN Code: Use this function to set your own personal PIN code. Highlight Change PIN

Code with pq and press OK to advance. A banner with three ﬁelds pops up:

Enter your old PIN at PIN Code. (Default PIN: 0000) Enter your new PIN at

Enter New and again at Reconﬁrm. A successful change of PIN is conﬁrmed by

an on screen message. Use EXIT to go back to the previous menu.

Once all settings are made, press EXIT to leave the Parental Control menu. A conﬁrmation banner will be

shown. Press OK to save your settings or EXIT to discard.

7.2.5 OSD Display

This menu allows you to set the OSD (On Screen Display) functionality of your receiver according to your

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 7300 CI plus Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 7300 CI plus

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info