480571
14
Zoom out
Zoom in
Vorherige Seite
1/25
Nächste Seite
11
PART 2 • English
English
DiSEqC repeat: Here you can set 1 x or 2 x time/s of DiSEqC repeat, if you are using a multiple
switch system or a DiSEqC motor behind a DiSEqC switch.
After you have set all necessary settings, press OK to start the desired scan process.
After the selected scan finished successfully the receiver will ask you to Save or Cancel, to save the search
result select Save, to discard select Cancel.
7.1.2 Channel Editor
Here you can Delete, Set Favourites, Lock, Move and Sort your channels.
Press TV/RAD button on your remote to select TV or Radio channel list.
Use tu pq to highlight and OK to select channel(s) for the desired option explained below:
Press RED button to delete the selected channel/s or channel group/s.
Press GREEN to add or remove channels to/ from your favourite group.
Press YELLOW to lock channel/s with a PIN code before you can watch or deleted it/them.
Press BLUE to move channels within the selected channel list.
Press EXIT to exit this menu and select OK at the displayed message to store changes or choose Cancel
to discard the changes.
7.2 Control Panel
The Control Panel allows you to change system settings as language and time, set protections with PIN code
and reset the receiver back to the factory settings. It consists of the following sub-menus: System Setup,
Factory Default and Lock Setup. Choose the desired sub menu with pq and press OK to advance.
7.2.1 System Setup
Use the Setup menu to configure the system settings of your receiver. The following sub-menus are
available: Language Setup, Time Setup, Receiver Information and User Setup.
7.2.1.1 Language Setup:
Here you can set the preferred OSD, Audio and Subtitle languages settings. Use pq to highlight the
setting you wish to change and tu to change the value of the setting. Press OK to display a list of all
available options, for the chosen setting. Press EXIT to exit and save settings.
OSD Language: This setting affects the menu language of your receiver. All menu’s and
messages will be displayed in this language.
Audio: is the preferred audio language. The receiver will automatically switch audio to
the preferred language whenever available.
Subtitle: Subtitles will be displayed in the selected language, whenever available.
7.2.1.2 Time Setup:
The Time Setup allows you to set the way the receiver collects and adjusts the time. You can also
adjust the Auto Standby function here for an automatic switch to standby after a desired time, to save
power. Use pq to highlight the setting you wish to change and tu or 0~9 to change the value of the
highlighted setting. Press OK to display a list of all available options, for the chosen setting.
Local Time: Adjust the correct time zone you are located based on GMT.
Summer Time: Select OFF or ON to adjust the current setting for summer time.
Date: The date is normally synchronized by satellite signal. If you like to change
another date, press OK to call calendar and use tu to change date.
Current Time: The time is normally synchronized by satellite signal. We recommend you
not to change time manually, although you can enter another time. Use 0~9
numeric buttons to enter your time.
Auto Standby: This is a new, power saving feature that helps you in reducing power
consumption. It will switch the receiver to standby mode when no command is
given for the set time. Possible settings are: 1, 2, 3, 6, 12, 24 hours and OFF.
Once all settings are made, press EXIT to leave the menu. A confirmation banner will be shown to save
your settings.
14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Strong SRT 7805 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info