Bedienungsanleitung Strong SRT 7806 (Seite 24 von 30) (Englisch)

751654

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

7.4.2 Weather

This submenu allows you to watch the weather in your region. Information about current weather

conditions and forecasts will be provided on your screen. You can refresh the information about weather

conditions (RED), change the location (GREEN) or select a city from the list (YELLOW). Use the virtual on-

screen keyboard to enter text characters. Please consider the information provided on your screen. To

confirm the location/city, select Save and press OK. To change the standard temperature from Celsius to

Fahrenheit and vise versa press the BLUE button. Use the button to return to the previous step. Press

to exit the menu and to go back to the viewing mode.

7.4.3 Ethernet Cong

This submenu allows you to setup or check the Internet connection. The default selection for DHCP field

is On. Normally all settings and connection are done automatically. To test if the Internet connection

works, select SET field and press OK. If successful, on-screen messages will confirm and you can start

using it. Otherwise please check your cable and router. You can set the DHCP field to Off and define all

required IP addresses manually using the 0~9 keys. To save all new address definitions, please select the

SET field and press OK.

7.5 Installation

Use t u to access the menu Installation, which includes the following submenus: Dish Setting, Channel

Search, Information, Factory Default and CA INFO. Use p q to select the submenu and press OK.

7.5.1 Dish Setting

The dish setting procedure from the menu is almost the same, as it was described in the First Time

Installation chapter 4.2.2. This section contains more detailed information of how to add or modify your

antenna parameters. Use p q to select required parameters. Use t u to change option values or OK to

select it from the list. Use the button to return to the previous step. Press to exit the menu and to

go back to the viewing mode.

Satellite: Select a satellite to be configured and scanned.

Press RED to scan the selected satellite signal. A window with the scan progess will be

appear.

LNB Power: Set the LNB power On or Off.

LNB Type: Select the LNB type. The Universal LNB (09750/10600 MHz) is supported and is the

most common on the market. SatCR is used for SatCR systems. See information below

for more details. It is possible to define the LNB type manually by selecting User

defined.

LNB Freq (Low/High):

Set the frequency of the selected LNB type.

22KHz Tone: Switch the 22KHz oscillator signal to ON (22K) or OFF (0). Refer to information of

Universal LNB.

DiSEqC1.0: Select the correct port of the corresponding LNB.

Available options: Off, LNB 1, …, LNB 4

Tone Burst: Set the tone control of your LNB. Available options: Off, LNB 1, LNB 2

Transponder: Select one of the available transponders of the chosen satellites in order to check your

reception or align the antenna.

The Signal Strength and Signal Quality indicators on the 2nd half of the screen will help you to make sure

that you get the signal with the selected parameters, as well as to adjust the antenna if necessary.

SatCR

If a SatCR LNB is used, please refer to the manual of the respective LNB to obtain technical data on user

bands numbers and corresponding frequencies.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 7806 Seite 24

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 7806

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info