Bedienungsanleitung Strong SRT 7806 (Seite 25 von 30) (Englisch)

751654

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

NOTE: SatCR can only work in combination with an optional multi-output (max. 8) satellite

splitter and a SatCR LNB, an example is STRONG type SRT L780 (max. 4 users).

NOTE: SatCR cannot be combined with any other DiSEqC function. SatCR systems are

mainly installed by professional experts.

7.5.2 Channel Search

The channel search procedure from the menu is almost the same as described in First Time Installation

chapter 4.3. This section contains more detailed information on how to add, modify or update your

channel list. In order to view video programmes, you must do a channel search with or without

smartcard in order to install the channel list of your choice. For HD+ channels, first insert HD+ smartcard

at the side panel of the receiver before you start the channel search. Then the receiver will install the

associated channel list of the HD+ bouquet (FTA and encrypted). For FTA channels only or for channels

from other satellites you do not need to insert the HD+ smartcard.

Select the search scheme you wish the wizard to follow:

1. Select HD+ channels to search for channels of the HD+ bouquet (channels numbered 100 and

above).

2. Select Preinstalled channels to restore a predefined German channel list from the receiver’s

memory (channels numbered 1~99).

3. Select Advanced channel search to search for channels on all/selected transponders for the

selected satellite (channels numbered above HD+ bouquet numbers).

Use the p q buttons to select the required search scheme. Use the t u buttons when you want to

change the value or press OK to select it from the list. Use GREEN to perform an HD+ channel update.

Use RED to restore the original HD+ channel list.

Use the button to return to the previous step. Press to exit the menu and to go back to the viewing

mode.

NOTE: If the messages No list found or No channels found are displayed, please check

the antenna connections, select correct satellite and check signal level and other

parameters from the satellite dish for selected satellites, as described in chapter 7.5.1.

Advanced channel search

Satellite: Select a satellite to be configured and scanned.

Transponder: Select the transponder you want to scan from the list of existing transponders.

Press RED to edit the parameters of the selected transponder. Press GREEN to add

a new transponder. Press YELLOW to delete the selected transponder (required

confirmation).

Frequency: Get information about the transponder frequency.

Symbol: Get information about the symbol rate of the selected transponder.

Polarization: Get information about the polarization of the selected transponder.

Search Mode: Select the channels that shall be installed. Available options: Free, Scrambled or All.

Channel Type: Select the type of channels that shall be installed. Available options: TV, Radio or

TV&Radio.

Search on:: Select where to search for new channels. Available options: One Transponder, One

Satellite or Selected Satellites.

The Signal Strength and Signal Quality indicators on the 2nd half of the screen will help you to make sure

that you get the signal with the selected parameters, as well as to adjust the antenna if necessary.

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Strong SRT 7806 Seite 25

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Strong SRT 7806

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info