GBGB
How to use
(cautions for safety)
20
How to measure (continued)
How to use
(cautions for safety)
21
(2) When WEIGHT LOCK mark lights up, press .
The measured value is stored as the tare, and the display
changes to 0.0 kg.
The
s
to show that the tare is under subtraction lights up.
• During the use of , cannot be used.
• During the use of , the numeric value cannot be inputted.
• In the case to cancel the set tare, press .
* The tare is 150 kg at the maximum.
* Measurement up to 300 kg as the total including tares is possible.
Note
In the case to use the tare
(1) Place an object (wheelchair, etc.) to register on the Platform.
4
Press or . The registered tare is displayed, and the
s
to
show the memory number of the used preset tare lights up, and
the
s
to show the input instruction of the clothing weight flashes.
(Refer to page 22 Convenient function “Memory rewriting mode”
for the setting method for the preset tare.)
• To cancel the input, press .
• Memory1 and Memory 2 can't use at the same time.
Note
Input the tare
* In the case that the memory1, memory2, clothing weight are not input, and the
s
flashes.
* In the case that the tare is not input, it moves to the “5 Input the clothing weight”.
In the case to use the preset tare
6
Get on the centre of the Platform, and the measured value is
displayed.
After displaying the measurement result, it is printed out
according to setting.
After that, it automatically returns to the ID input screen.
* In the case that the preset tare is not used, the
s
to show that the tare is
flashes.
• In the case that the BMI display is set to OFF in the “Setting of the
BMI”( page 16), the BMI is not displayed.
• However, in the case that 0 sheets is set in the “Setting of the number of
sheets to print” ( page 17) and all items set to OFF in “Setting of the
print items” ( page 17), it is not printed out.
Note
Make a measurement
7
Press the key.
The display goes off.
Turn OFF the power
5
(1) Press .
0.0 kg is displayed at the bottom line.
Input the clothing weight
* In the case that the clothing weight is not input, it moves to the “6 Make a measurement”.
(2) Press – to input the clothing weight.
• The input range is 0.1 kg – 150 kg. (However, as the total weight including
the memory 1 or 2).
Note
(3) While memory 1 or Memory 2 were set, total weight will be
displayed at the top line and PT should be lights up, then STEP
ON is flashing.
3
Input by pressing – .
After input, press and it moves to the “4. Input the tare”
screen.
• In the case that OFF is set in the “Setting of the BMI”( page 16), this
screen is not displayed.
• The height can be inputted in units of 1 cm in the range of 90 – 249 cm.
When is pressed during input, the non-inputted digits are filled with
0s.
• When an input is mistaken, press . The input is deleted.
• Pressing without entering your height, BMI will not be calculated and
it goes to “ 4 Input the tare “ automatically.
Note
Input the height
