GBGB
How to use
(cautions for safety)
22
How to use
(cautions for safety)
23
Convenient functions
Memory rewriting mode
The weight stored in the memory 1 and the memory 2 can be changed.
1
In the case that the power is on, move to the “2. Change the
memory contents”.
Press .
• According to the contents of the initial setting, the screen displayed after
all display flashing varies.
Note
Turn on the power
2
(1) Press and hold or for 3 seconds or more.
Change the memory contents
The renewed registered weight is displayed on the top line,
and it automatically returns to the measurement screen.
Using Numeric Keys
(2) Press – to input the weight to register. The measured
value is displayed at the bottom line.
(2) Place an object (wheelchair, etc.) to register as a tare on the
Platform. The measured value is displayed at the bottom line.
• The input range is 0.1 kg – 150.0 kg in units of 0.1 kg.
• When the input is mistaken,
e
Press (the inputted numeric value is cleared).
e
Moreover, Press (the numeric value is not changed and returns to
the measurement screen).
• In the state that the measured weight is displayed, the numeric value can
be inputted again by pressing the numeric keys.
Note
In the case to measure the weight
In the case to use numeric keys
Only once BMI mode
The BMI can be measured even in the case that the BMI mode is not set. BMI score will be effective only once.
1
In the case that the power is on, move to the “2. Change to the
BMI mode”.
Press .
• According to the contents of the initial setting, the screen displayed
after the all display flashing varies.
Note
Turn on the power
2
Press . “000 cm” and the
t
mark to show the input
instruction of the height flash.
Change to the BMI mode
3
Press – to input.
The procedures after this are the same as the measuring method
when BMI mode setting.
•In the case the BMI is measured continuously, please set at “6: Setting of
the BMI” ( page 16).
• The height input range is 90 - 249 cm in units of 1 cm.
• When the input is mistaken,
e
Press (the input is deleted).
• Pressing without entering your height, BMI will not be calculated
and it goes to “ 4 Input the tare “ automatically ( page 20).
Note
Input the height
Weight lock off
This is a function to release the fix of the measured value that is once fixed for display after measurement.
1
Press during the weight lock.
The display fix is released.
Release the weight lock
The measured weight is memorized and 0.0kg is displayed at
the top line. Afterwards it automatically returns to the
measurement screen.
Take measuring the weight
