Bedienungsanleitung Tascam DP-02CF (Seite 35 von 80) (Englisch)

617899

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

IMPORTANT SAFETY INSTRUCTIONS

TASCAM DP-02/DP-02CF 35

2 – Advanced techniques

You can set the time between repeats up to 9.9 seconds.

Press and hold the SHIFT key, and press the INTERVAL

key. The screen shows:

Use the DATA dial to set the repeat interval from 0.5

seconds to 9.9 seconds in 0.1 second steps.

T I P

This repeat interval allows you to reposition your

hands for a guitar lick, take a breath for a vocal phrase,

etc., when you are rehearsing.

Press NO/EXIT to exit the interval setting mode.

Setting the repeat interval

Tempo setting

For the bars/beats function to be useful, you must set up a

tempo and time signature. These allow the unit to calculate

where the bar and beat divisions fall, based on the tempo of

your song.

1. With playback stopped, press MENU and select the

MIDI menu.

2. Select the TEMPO/T.SIG (tempo and time signature)

action and press the ¥ cursor or YES/ENTER key:

3. There are two parameters here, the tempo and the

time signature. Use the cursor and DATA dial to set

these.

The tempo is measured in beats per minute (bpm) and can

be set from 20 to 250.

The time signature can be set with the number of beats to

the bar (1 through 12) and the number of beats per whole

note (1, 2, 4, or 8).

T I P

Most rock and pop music is in 4/4 (with a few famous

exceptions). Some country and folk songs, as well as

waltzes, are in 3/4.

Working in bars & beats

Besides working in minutes and seconds (as explained in

detail in “Direct location” on page 29), the unit can work

in musical bars and beats. This is especially useful when

working with external MIDI devices (see “Working with

MIDI” on page 37).

T I P

“Bars” are also sometimes referred to as “measures”.

Selecting the time mode

Once the time signature and tempo are set, the unit can

map the bar and beat divisions to the time.

To display bars and beats: On the “home” screen,

move the cursor to the ABS field:

Turn the DATA dial clockwise. ABS changes to BAR and the

current position in bars and beats is shown, with the tempo

shown on the right of the screen:

With the cursor at BAR, turn the DATA dial counterclock-

wise to return to the time-based display.

Location is performed in the same way as described in

“Location” on page 29, except that there are only two fields

now, bars and beats.

Track editing is also performed in the same way as

described in “About track editing” on page 47, but because

the editing points are now set to a bars and beats-based

position, the editing can be more “musical”.

Location mark and Point editing Even when the

screen shows positions in bars and beats, location points are

edited in minutes and seconds (“To edit a location mark” on

page 29 and “IN, OUT and TO marks” on page 48 ), except

that the bars and beats equivalent is also shown.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-02CF Seite 35

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tascam DP-02CF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info