Bedienungsanleitung Tascam DP-02CF (Seite 36 von 80) (Englisch)

617899

Zoom out

Zoom in

Vorherige Seite

1/80

Nächste Seite

IMPORTANT SAFETY PRECAUTIONS

36 TASCAM DP-02/DP-02CF

2 – Advanced techniques

When both LOCATE LIST (µ/≤ ) keys are held down

together in “bars and beats” mode, the display looks some-

thing like this:

Use the cursor (¶,§) keys to select the mark to trim,

and press the ¥ cursor key to show the trim screen.

Selecting a point to edit shows the bars and beats below

the absolute time value. The bars and beats cannot be set

directly, but change, together with the absolute time value,

as the DATA dial is turned:

NOTE

IN, OUT and TO points do not show the bars/beats

value when being edited.

Metronome

To help you keep in time, the unit provides an internal

metronome function and a MIDI metronome function. The

internal metronome function allows you to listen to the

metronome on the unit, while the MIDI metronome func-

tion generates a metronome output on the MIDI interface.

1 Press MENU, use the DATA dial or cursor (¶,§

) keys to select the MIDI menu, and press the ¥

cursor or YES/ENTER key.

2 Select the METRONOME item, and press the ¥ cursor

or YES/ENTER key.

When “INTERNAL” is selected at “Output”

[internal metronome]

The unit’s internal metronome (not an external sound source)

can be output to headphones and LINE OUTPUT L/R.

Mode Select from REC ONLY (only at recording) and

REC&PLAY (at recording and playback).

T I P

The internal metronome is not output in the following

instances:

• While the BOUNCE key is lit

• While the MASTER key is ﬂashing

or is lit

LEVEL Set the output level of the metronome within the

range 0 to 127. (The output level cannot be adjusted on the

MASTER fader.)

When “MIDI” is selected at “Output” [MIDI

metronome]

This setting generates a metronome output via the MIDI

interface. Generally, percussion type sounds are used as

the metronome. Any sound, of course, can be produced.

You can select MIDI channel, note/note on velocity of a

regular click, and note/note on velocity of an accent.

Scroll the list to set the following parameters:

Mode Select from REC ONLY (only at recording) and

REC&PLAY (at recording and playback).

MIDI Ch The MIDI channel on which the metronome

signals are output.

T I P

Channel 10 is deﬁned as the default drum channel for

all General MIDI devices.

AccNote The note played at the start of each bar. C3 is

equivalent to MIDI note 60.

AccVelo The velocity (which typically affects the

volume) of the note at the start of each bar.

NrmNote The note played at each beat, except at the

start of each bar. C3 is equivalent to MIDI note 60.

NrmVelo The velocity (which typically affects the volume)

of the note at each beat, except the start of each bar.

When “ OFF” is selected at “ Output”

The metronome function is disabled, and no items other

than Output are displayed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Tascam DP-02CF Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Tascam DP-02CF

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info