Bedienungsanleitung Telair Energy 2510b (Seite 18 von 40) (Englisch)

688849

Zoom out

Zoom in

Vorherige Seite

1/40

Nächste Seite

Energy 2510 B

Vers. 002

5 OPERATING INSTRUCTIONS

The generating set is de-

livered without engine oil.

Use oil for multigrade 4-stroke petrol engines,

having SAE viscosity suitable for the operat-

ing climate and in the amount indicated (see

table and detailed indications on the user and

maintenance manual of the engine).

The ENERGY 2510 B series generators consist

of petrol internal combustion engines connected

to an alternator that can produce alternating elec-

trical current. The generating sets are assembled

inside a steel plate casing, insulated and sound-

proofed using special sound absorbing materials.

Fuel is fed to the internal combustion engine via

a pump fitted to the generating set as part of the

standard supply.

5.1 Machine safety

The generating sets come with perfectly sealed

casings, so there is no danger of contact with any

moving or high temperature parts or with live ca-

bles.

The doors open with a lock and key. The keys

must not be left within the reach of children or in-

experienced persons.

The generating sets

must only and exclusively be used with their

doors shut.

Remove any flammable substance (for exam-

ple: petrol, paints, solvents, etc.) from near

the generating sets.

Make sure that any hot parts of the generat-

ing sets are not in contact with any flammable

material.

Never fill up the fuel tank while the engine is

running.

Never touch the generating sets or the wiring

connections with wet hands.

Never replace the fuses or the cut-out

switches with others having higher amper-

age.

Should any electrical part need checking, this

must only be done with the engine turned off

and by specialised personnel.

The generating sets have been built in compli-

ance with the safety standards listed in the EEC

statement of compliance.

6 USING THE GENERATING SET

6.1 Starting up the generating set

The generating sets are provided with an elec-

tronic remote control panel (Fig. 30) which allows

you to perform starting up / turning off operations

and to check their running conditions.

The panel controls are:

1 ON/OFF switch

2 Display unit

3 High temperature indicator

4 Engine minimum oil level indicator

5 Startup failed

6 Generator running (flashing)

7 Engine oil change indicator

8 Fuel warning light

9 Display time changeover switch

10 Reset

Set the startup switch (Fig.30 Ref.1) to its “ON”

position. The message “WAIT” will be displayed

for 8 seconds. After this time, the electronic con-

trol panel will start the first automatic procedure

for starting up the generating set. If the engine

starts up at the end of this phase, the “generator

running” indicator light (Fig.30 Ref.6) will start to

flash.

Should the engine not start up, this automatic

procedure will be repeated up to 4 times.

If, at the end of a complete cycle, the engine has

not yet started up, the “startup failed” indicator

(Fig.30 Ref.5) will light up to signify that the gen-

erating set has failed to start up.

If the “startup failed” indicator (Fig.30 Ref.5) light

only stays lit, you can repeat the procedure sev-

eral times. If the generating set has not started

up after several attempts, contact the manufac-

turer’s After-sales service.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Telair Energy 2510b Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info