Bedienungsanleitung Telefunken TX151 (Seite 51 von 75) (Französisch)

486215

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

TX Bluetooth Guide 51

4. If there are already four devices on the paired devices list, the display shows Maximum of

4 devices can be paired and prompts you to replace an existing paired device.

5. The screen displays Please set your mobile phone to search for devices, then press

again MENU/OK.

6. If a device is already connected to the telephone base, the screen displays Connected

device will be temporarily disconnected. Press MENU/OK to temporarily disconnect the

device and continue the pairing process.

7. Press MENU/OK to set the telephone base to discoverable mode.

8. Then, promptly turn on the Bluetooth feature of your mobile phone and search for or add

new devices.

9. Once your mobile phone finds TELEFUNKEN TX 1** , press the appropriate key on your

mobile phone to continue the pairing process.

10. Enter the PIN of the telephone base (the default PIN is 0000) into your mobile phone to

continue the pairing process.

- When a device is successfully connected, the handset displays Paired with mobile

and then Mobile setup completed Device connected.

- When you already have two active devices connected, the handset shows Maximum of

2 devices can be connected. You are prompted to replace an existing device on the

active devices list;

Note: The pairing process may take up to one minute. If the pairing process fails, try again.

The steps for the pairing process may vary for different mobile phones. If this happens, follow the

prompts on your mobile phone and your TELEFUNKEN TX 1** to complete the pairing process.

If you put the handset back in the telephone base or charger while pairing, the process

discontinues and the handset returns to idle mode.

Auto connection

When a device is successfully paired with the telephone base but not connected, the handset

displays

Mobile setup completed Device not connected and then

Auto-connect function enabled Press OK. You can press MENU/OK to exit. You can also

connect a device manually).

D. Pairing and connecting a headset

Before you begin, make sure that your Bluetooth enabled headset is not connected to any other

Bluetooth device. Refer to your headset User's Manual to learn how to search for or add new

Bluetooth devices.

1. In standby time. Press MENU/OK and choose Bluetooth.

2. Select Add headset.

3. Place Bluetooth headset next to base. Press Menu/OK.

4. If there are already four devices on the paired devices list, the screen displays Maximum

of 4 devices can be paired and prompts you to replace an existing paired device

5. Press MENU/OK. The screen displays Please set your headset to discoverable mode,

then press OK.

6. If a device is already connected to the telephone base, the screen displays Connected

device will be temporarily disconnected. Press MENU/OK to temporarily disconnect the

device and continue the pairing process.

7. Set your headset to discoverable mode (refer to the User’s Manual of your headset).

8. Press MENU/OK to search for your headset.

9. Once the telephone base finds your headset, press MENU/OK

10. Enter the PIN of your headset (the PIN for most Bluetooth devices is 0000), then press

MENU/OK.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Telefunken TX151 Seite 51

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Telefunken TX151

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info