Bedienungsanleitung Telefunken TX151 (Seite 52 von 75) (Französisch)

486215

Zoom out

Zoom in

Vorherige Seite

1/75

Nächste Seite

TX Bluetooth Guide 52

11. When the handset displays Headset A paired to base. Connect now? Press OK, then

press MENU/OK on the handset.

- When you already have two devices on the active devices list, the handset shows

Maximum of 2 devices can be connected. You are prompted to replace an existing

headset on the active devices list

- When you already have one headset on the active devices list, the handset shows

Only 1 headset can be connected. You are prompted to replace the headset on the

active devices list

10. When a device is successfully connected, the handset displays Headset setup

completed Device connected and the corresponding status icon (Mobile1 or Mobile 2).

Note: The pairing process may take up to one minute. If the pairing process fails, try again.

If you put the handset back in the telephone base or charger while pairing, the process

discontinues and the handset returns to idle mode.

Auto connection

When a device is successfully paired with the telephone base but not connected, the handset

displays Headset setup completed Device not connected and then Auto-connect function

enabled Press OK. You can press MENU/OK to exit. You can also connect a device manually.

E. Paired devices

All paired devices are stored on the Paired devices list.

Up to four devices (one headset only) can be paired with the telephone base.

To use a paired device, it must be connected and on the active devices list.

Once you have paired a device with the telephone base, you do not need to repeat the pairing

procedure

again unless you delete the device from the paired devices list.

Note: Only the first 15 characters of the device name are shown on the paired devices list.

Rename a paired device

You can change the name of a paired device on the paired devices list.

1. In standby mode, Press MENU/OK and choose Bluetooth

2. Select Paired devices,

3. Select the device you want to rename

4. Select Rename and Press MENU/OK

5. The screen displays ENTER NEW NAME.

6. Use the keypad to edit the name

7. Press MENU/OK to confirm. The handset displays Device renamed.

Remove a paired device

If you want to add another Bluetooth device and you already have the maximum of four devices on

the paired devices list, you must first delete a device from the paired devices list.

1. In standby mode, Press MENU/OK and select Bluetooth

2. Select Paired devices,

3. Select the device you want to remove

4. Select Remove paired.

5. The screen displays Remove device from paired list? Press Menu/OK to confirm

6. The handset displays Device removed from paired list.

F. Active devices

Only devices on the active devices list can establish a Bluetooth connection with the telephone

base. Although two paired devices can be connected to the telephone base, only one Bluetooth

mobile phone or a headset can be on a call at a time.

Note: When adding, removing, or replacing a Bluetooth device on the active devices list, all

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Telefunken TX151 Seite 52

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Telefunken TX151

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info