Bedienungsanleitung Teufel DecoderStation 7 (Seite 14 von 20) (Englisch)

562467

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

14 • DecoderStation 7

“Surround” menu

With the control dial 3 or the arrow buttons 27 “

▲/▼”

you can switch surround mode for 2 channel sources in

the following order:

2.1 Stereo Stereo only via front left/right and

subwoofer

5.1 Stereo Stereo across all channels (upmix)

Dolby PLII Movie Dolby ProLogic II for movies

Dolby PLII Music Dolby ProLogic II for music

DTS NEO:6 Music DTS NEO:6 for music

DTS NEO:6 Cinema DTS NEO:6 for cinema

Some options may not be available if not all satellite

speakers are connected.

Dolby

Digital and DTS (standard and HD)

The surround mode is ﬁxed for Dolby Digital or DTS

coded multi-channel tracks; this menu is therefore not

available while these formats are played back.

“Tone Control” menu

Mode

Dynamic Compr.

Dynamic compensation regulates volume differences

between individual tracks on CDs or other audio sources

and ensures that playback is neither too loud nor too

quiet. Possible settings: On, Off.

Cinema EQ

This function reduces the percentage of high tones from

the original movie sound mix to perfectly adapt the sound

to the acoustics of a living room. Possible setting: On or

Off.

Tone

Here you can adjust the sound (high tones and bass

tones). Possible values: from –10 dB (decrease) to +10 dB

(increase).

Equalizer

With this function, very ﬁne adjustments within nine fre-

quency ranges are available. You can adjust all channels

at the same time or each channel separately (the two rear

channels are only available in 7.1 operation.) Possible

values: each from –20 dB (decrease) to +6 dB (increase).

The “Reset” menu item resets all frequency ranges for the

selected channel to zero (neutral).

Note: The equalizer is inactive with some high-deﬁnition

formats.

“Speaker Levels” menu

Here you can adjust the relative volume from “–10” (de-

crease) to “+10” (increase) for each speaker.

It is recommended to use our sound level meter to opti-

mally adjust the sound level.

“Source Levels” menu

You can adjust the relative volume from “–10” (decrease)

to “+10” (increase) for each audio source here.

“Audio Mapping” menu

Here you can assign an audio input to each of the three

HDMI inputs.

Example: If you would like to connect a PC without HDMI

output: With a DVI to HDMI adapter, you transmit the

video signal while the audio signal is present at one of

the analogue inputs (Aux) via an RCA cable.

“Speaker Setup” menu

Phase Sub

This allows you to activate and deactivate the phase shift

(180°) for the subwoofer. Select the setting, with which

the subwoofer produces the loudest and clearest sound.

Lip Sync

Digital image processing in the television set requires

some time. In order to keep the image and sound syn-

chronous, delay the sound by a few milliseconds. Here,

you can adjust the audio delay from 0 to 100 ms for

each HDMI and other inputs in order to keep the sound

synchronous.

Speaker Size

Here you can set the size of the speakers in use for opti-

mally driving them. Five conﬁgurations are available:

SSSS1 All speakers are small, subwoofer present.

LSSS1 Large front speakers, small center and rear

speakers, subwoofer present.

LSSS0 Large front speakers, small center and rear

speakers, no subwoofer.

L0SS0 Large front speakers, no center speaker, small

rear speakers, no subwoofer.

LLLL1 All speakers large, subwoofer present.

The letters represent the speakers: Front left/right, center,

surround, rear center (only in 7.1 operation). S (small)

stands for small and L (large) for large speakers, 0 is also

possible for the center speaker if none is present. The last

number stands for the subwoofer (1 = present, 0 = not

present).

If you connect the DecoderStation to a multichannel ac-

tive subwoofer, select the setting SSSS1.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Teufel DecoderStation 7 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info