Bedienungsanleitung Thomson THS 845 (Seite 12 von 32) (Englisch)

658771

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

STARTING UP FOR THE FIRST TIME

the remote control to navigate forward or back through the wizard steps. Press the OK button to edit a

parameter and select its value from the drop list that will appear on the right side of the screen.

4.1 Menu Language and Tuner type

This is where you can set the menu language and select the tuner type. First select the language to be

used for all menus by pressing the tu buttons.

Select Streaming source if you want to use an external satellite tuner as SAT-IP server. The most common

way is to confirm the setting Local tuner.

Press the GREEN button on the remote control to proceed to Antenna settings.

4.2 Antenna Settings

Satellites 1 – 4: To set up the receiver for the type of connected antenna, follow the instructions

below. Select the satellites you wish to receive with the receiver. Each of the

satellites in the built-in satellite list is configured with predefined default

parameters. You may press the BLUE button to edit these values. See below

details for advanced settings. In case you use Astra 19.2 satellites, skip these steps

and press the GREEN button (continue reading chapter 4.4 Channel Search).

4.3 Advanced Satellite Settings

LNB Type: Select Universal for most standard LNBs or Unicable if you have a Unicable SatCR

LNB or multiswitch.

Satellite: Use this option to select the satellite for which you would like to set the position.

Use the COLOUR BUTTONS on the remote control, as shown at the bottom of

the screen, to delete or add a satellite from the satellite list and set their individual

settings.

LOF Low and High Band: The LOF (Local Oscillator Frequency) of the LNB is usually printed on the LNB itself

or in its documentation. You can set the High and Low LOF frequencies to match

the LNB here.

Band switching: The receiver uses a 22 kHz signal to control the band of the LNB. If you do not

know if your LNB supports this feature, set the option to Auto.

DiSEqC type and DiSEqC input:

You can connect up to two cascadable DiSEqC switches to the receiver. This

option allows you to set the type and input port for each switch.

Reference transponder: This option allows you to set which transponder is used as the reference for the

satellite signal strength.

Transponder number: Use this option to select a transponder from the built-in transponder list. Once

selected from the list, the Frequency, Polarity and Symbol rate fields will be updated

accordingly. Alternatively you can set these fields manually.

Frequency: Set the frequency of the reference transponder.

Polarity: Set the polarity of the reference transponder.

Symbol rate: Set the symbol rate of the reference transponder.

Tuner IF and Channel ID (SatCR only):

This option allows you to select the SatCR Tuner IF frequency (also known as User

Band frequency) and the channel ID for the receiver. In a typical SatCR installation,

you are able to connect multiple receivers to a single LNB or Multiswitch output,

with each receiver set to connect to a different SatCR user band and channel ID.

Signal strength and signal quality bars:

In two level bar meters, on the right side of the screen, the user can see the

strength and quality of the signal coming from the antenna dish to the tuners.

These two meters can be used while doing a fine-tuning of the antenna position.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson THS 845 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info