Bedienungsanleitung Thomson THS 845 (Seite 13 von 32) (Englisch)

658771

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

BASIC OPERATION

English

The antenna has to be adjusted to have maximum possible signal strength and

signal quality.

4.4 Channel Search

In order to view video programmes, you must first do a channel search with or without smart card in order

to install the channel list of your choice. For HD+ channels, first insert the smart card at the right-hand side

of the receiver before you start the channel search. Then the receiver will install the associated channel list

of the HD+ bouquet (FTA and encrypted). For FTA channels only, you do not need to insert the smart card.

• Select Automatic (HD+) to search for channels on HD+’s bouquets.

• Select Automatic channel search to search for channels on all transponders for the selected satellite.

• Select Predefined List to restore a predefined German channel list

Finding and storing the channels

Once the options are set, press the GREEN button on the remote control to start the channel search. Once

a channel search is started, a progress bar and list of channels found will be displayed. At any time, you

may stop the search by pressing Exit on the remote control. After the channel search is complete, press

the GREEN function button on the remote control to save the channel list and exit.

NOTE: If you see the messages No list found or No channels found please check the antenna

connections and signal levels of the satellite dish.

5.0 BASIC OPERATION

5.1 Programme Navigation

• You can use the numeric buttons 0~9 on your remote control.

• You can use the directional buttons pq on your remote control or on the front panel of the receiver.

• You can use the P+/P- buttons on your remote control

• Select your viewing list by pressing the TV/Radio or Fav button, select the programme list with the

navigation buttons tu and confirm the selection with OK.

5.2 Volume Control

Volume Control allows you to adjust the audio volume.

• Press the V+/V- button to adjust the audio volume.

• Press the ! button to stop the audio temporarily.

NOTE: The mute function remains set while you switch channels.

5.3 Programme Information (Info banner)

Fig. 12

Programme information is always displayed for a certain period of time whenever you switch channels

(Fig. 10). You can view the programme information by pressing the Info button while watching a

programme. Press Exit to hide the info banner.

1. Indicates channel number and name

2. Use the pq buttons of the remote control to change channels

3. Informs about current programme name and timeline

4. Indicates HbbTV web service notification: The icon appears when a web-based service is available

along the broadcast on this channel. Press the RED button on the remote control to launch the

service on screen.

5. Provides Parental rating information (displayed if available with the programme broadcast)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Thomson THS 845 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info