Bedienungsanleitung Toolson Pro HMD1800PRO (Seite 13 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

781902

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

13 І 108

Unpacking

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the pack-

aging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport

damage.

• If possible, store the packaging until the warranty

period has expired.

Description of parts (Fig.1)

1. Hand-Mixer

2. Mortar beater - R

3. Mortar beater - L

4. ON / OFF-switch

5. Trip switch

6. Speed control

7. 2-speed switch

8. Handle

9. Holder - R

10. Holder - L

11. Sleeve - R

12. Sleeve - L

General safety standards

ATTENTION!

Please read the entire instructions. Failure to fol-

low the instructions below may result in causing

electric shock, re and / or serious injuries.

Keep all safety information and instructions for fu-

ture reference.

In this safety information the term “power tool” refers

to mains operated power tools (with power cord) and

battery operated power tools (without power cord).

Workplace

• Keep your work area clean and tidy. Cluttered and

dark working areas are accident-prone.

• Do not operate power tools in explosive atmosphe-

res, where ammable liquids, gases or dust are pre-

sent. Power tools generate sparks which may ignite

the dust or fumes.

• Keep children and other persons away while opera-

ting a power tool. Distractions can be a reason for

losing control of the tool.

Electrical safety

• Power tool plugs must match the outlet. Do not

modify the plug in any way. Do not use any adap-

ter plugs with grounded devices. Unmodied plugs

and matching outlets will reduce the risk of electric

shock.

• Avoid physical contact with grounded surfaces such

as pipes, radiators, ranges and refrigerators. If your

body is grounded the risk of an electric shock incre-

ases.

• Do not expose the power tool to rain or wet condi-

tions. Water that enters a power tool will increase

the risk of electric shock.

• Do not abuse the cord; do not use the cord to carry

or hang up the power tool or to unplug the power

tool from the mains. Keep the power cord away from

heat, oil, sharp edges or the power tool’s moving

parts. Damaged or tangled power cords will increase

the risk of electric shock.

• When operating a power tool outdoors, use only

extension cords that are approved for outdoor use.

The use of an extension cord that is adapted for out-

door use reduces the risk of electric shock.

• If working with the power tool in a damp location

Introduction

MANUFACTURER:

scheppach Fabrikation von

Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment and

success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by the

product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs due

to the non-compliance of the electric regulations and

VDE regulations 0100, DIN 57113 / VDE0113.

WE RECOMMEND:

Read through the complete text in the operating instruc-

tions before installing and commissioning the device.

The operating instructions are intended to help the user

to become familiar with the machine and take advan-

tage of its application possibilities in accordance with the

recommendations. The operating instructions contain

important information on how to operate the machine

safely, professionally and economically, how to avoid

danger, costly repairs, reduce downtimes and how to in-

crease reliability and service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in your

country. Keep the operating instructions package with

the machine at all times and store it in a plastic cover

to protect it from dirt and moisture. Read the instruction

manual each time before operating the machine and

carefully follow its information. The machine can only be

operated by persons who were instructed concerning the

operation of the machine and who are informed about

the associated dangers. The minimum age requirement

must be complied with. In addition to the safety require-

ments in these operating instructions and your country’s

applicable regulations, you should observe the generally

recognized technical rules concerning the operation of

woodworking machines.

Range of application

Your electronic mixing unit has been designed to blend

and stir the following materials:

- Thin liquid mixing material such as paints, varnishes

or plaster.

- Thick liquid mixing material such as adhesives, pas-

tes, lling compounds or mortar.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Toolson Pro HMD1800PRO Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info