Bedienungsanleitung Torqeedo Cruise 3.0 FP (Seite 60 von 92) (Deutsch, Englisch)

807535

Zoom out

Zoom in

Vorherige Seite

1/92

Nächste Seite

DE EN

All components

Keep the following points in mind when planning:

• Power cables between the motor and battery may only be extended with

Torqeedo extension cables. Use a maximum of one extension per motor.

• TorqLink stub lines must not be extended.

• The Torqeedo system operates with high electrical power, so plan the

installation location of the components so that sensitive electrical devices

such as radios or sensitive measuring devices such as compasses will not

be affected. If necessary, reposition the affected devices.

• Plan the installation of components with cable connections so that the con-

nections point downwards to avoid standing water in the plug.

Motor

It is important to install and x the motor correctly to ensure safe operation of

the boat. Incorrect installation or the use of unsuitable sealants and consumables

can lead to leaks and corrosion. Specialist knowledge is required for work and

modications to the boat hull; if necessary, have the planning and installation

carried out by a specialist.

Keep the following points in mind when planning:

• When planning, take into account the construction material of the boat

hull and plan the appropriate sealants and attachment materials to prevent

corrosion and ensure a permanent seal of all sealing surfaces.

• Drill holes and openings in the hull can affect the structure and stability

of the boat hull. Take appropriate measures to ensure the structure and

stability of the boat hull.

• The motor must be connected to the boat hull in such a way that it can

withstand all the forces that occur during operation.

• When planning, make sure that there is sufcient distance between the

propeller and the boat hull and rudder blade.

• Plan for sufcient distance to the rudder blade if you want to use a folding

propeller, as this requires more space due to the folding mechanism. The

distance between the shaft tube of the motor and the leading edge of the

rudder blade must be min. 450mm.

NOTE! If necessary, consult or have a specialist carry out your planning and

installation to ensure your Cruise system is correctly installed.

NOTE! If the maximum speed of the boat exceeds 14 knots through the water

(STW), the optional folding propeller must be used to avoid damage to the motor

caused by excessive propeller rotational speeds.

GPS antenna (Cruise 3.0 FP only)

The GPS antenna receives the GPS signal and makes it available to the Cruise

system for calculating important parameters.

It is important that the GPS antenna is installed correctly, and in particular that

it is installed in the correct position, in order for the entire Cruise system to

function properly.

INFO! Cruise 6.0 TorqLink models use the accelerator lever GPS antenna and do

not have an external GPS antenna.

Keep the following points in mind when planning:

• The ideal installation location for the GPS antenna is on deck with a clear

view upwards to receive the GPS signals from the GPS satellites.

• If you want to use the GPS antenna below deck, you should attach it

provisionally at the intended installation location and carry out a system

test. If the material of your boat hull does not interfere with the reception of

the GPS signal, it can be installed below deck. Correct function can be rec-

ognised by the fact that the Cruise system does not display any errors and

the GPS speed and dynamic range calculation function correctly. Note that

an overcast sky can have an additional negative effect on the GPS signal

and take this into account in your test.

• If your boat hull is made of metal, the GPS antenna must be installed on

deck.

• Note the maximum cable length available of 2450 mm.

• Note that the GPS antenna cable must not be extended.

Batteries

It is important to mount and x the batteries correctly to ensure safe operation

of the boat, regardless of whether you operate your Torqeedo system with Power

24, Power 48 or external batteries. During planning and installation, ensure that

the batteries are securely fastened at every stage. When using external batteries,

additional measures may be necessary, e.g. fuses, ventilation, heating etc. Clarify

the measures necessary for the marine sector with your battery supplier.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Torqeedo Cruise 3.0 FP Seite 60

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Torqeedo Cruise 3.0 FP

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info