807535
62
Zoom out
Zoom in
Vorherige Seite
1/92
Nächste Seite
62
DE EN
First determine and plan the installation positions of all components.
Measure the required length of the TorqLink-Backbone.
Measure the lengths of all required stub lines (cable connection between
component and TorqLink-Backbone).
When planning, please note that TorqLink stub lines must not be extended.
If necessary, plan the TorqLink-Backbone so that the components can be
connected through the TorqLink stub line without an extension. If necessary,
extend the TorqLink-Backbone to connect a component that is far away; you
can nd corresponding extensions in our accessories catalogue.
Cables must be xed every 400 mm, plan attachment material. In places
where fastening is not possible, a scuff guard must be tted.
Openly laid cables must be protected with chang protection, plan suf-
cient material.
When planning, please note not to bundle power cables with data or anten-
na cables (e.g. radios) for other loads.
Observe the minimum bending radii of the cables when planning.
If a second earthed onboard power system is available, ensure that both
systems use a common earthing point.
Live parts must be tted or installed with protection against accidental
contact; the necessary installation space must be taken into account during
the planning stage.
6.3 Tools, equipment and material
Tool Used for
Spanner SW13 or socket wrench
SW13
Battery cable to battery terminals
Socket wrench SW17
Hexagon socket 3mm
Anode replacement
Spanner SW17 or socket wrench
SW17
Propeller assembly
Spanner SW17 Motor to hull attachment
Hexagon socket 6mm Attaching the clamp to the mounting
ange.
Hexagon socket 4mm Attaching the locking ring to the shaft
tube
Torque key Fastening screws and nuts
Suitable sealant Sealing the hull openings
Lubricant, if necessary salt water
resistant for salt water use
Installing the motor in the mounting
ange
Cable ties in various sizes Cable routing and mounting
M5 mounting screws, length as
required
Installing the battery main switch
M5 mounting screws, length as
required
Installing the charger unit
M6 mounting screws, length as
required
Installing the fast charger
M6 mounting screws, length as
required
Installing the accelerator lever
Attachment material Attaching the power cable and data
cable
Abrasion protection Installing/routing power cables
Earthing cable 25 mm² cross-section Installing the earthing cable
62

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Torqeedo Cruise 3.0 FP wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Torqeedo Cruise 3.0 FP

Torqeedo Cruise 3.0 FP Bedienungsanleitung - Holländisch, Dänisch - 92 seiten

Torqeedo Cruise 3.0 FP Bedienungsanleitung - Französisch, Italienisch - 92 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info