Bedienungsanleitung Trendnet TEW-712BR (Seite 29 von 51) (Englisch)

541687

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

TRENDnet User’s Guide

TEW-712BR

3. Review the DHCP Server settings.

• DHCP Server – Enable or Disable the DHCP server.

• Start IP – Changes the starting address for the DHCP server range. (e.g.

192.168.10.20)

• End IP – Changes the last address for the DHCP server range. (e.g. 192.168.10.30)

Note: The Start IP and End IP specify the range of IP addresses to automatically

asign to computers or devices on your network.

• Domain Name (Optional) – Specifies a domain name to assign to computers or

devices. (e.g. trendnet.com)

• Lease Time – Click the drop-down list to select the lease time.

Note: The DHCP lease time is the amount of time a computer or device can keep

an IP address assigned by the DHCP server. When the lease time expires, the

computer or device will renew the IP address lease with the DHCP server,

otherwise, if there is no attempt to renew the lease, the DHCP server will

reallocate the IP address to be assigned to another computer or device.

4. To save changes, click Apply.

Dynamic DHCP List – You can view the list of active lease entries for computers or

devices that have been assigned IP addresses automatically from the DHCP server on

your router.

Set up DHCP reservation

Main > LAN & DHCP Server

DHCP (Dynamic Host Configuration Protocol) reservation (also called Static DHCP) allows

your router to assign a fixed IP address from the DHCP server IP address range to a

specific device on your network. Assigning a fixed IP address can allow you to easily

keep track of the IP addresses used on your network by your computers or devices for

future reference or configuration such as virtual server (also called port forwarding, see

“

Virtual Server” on page 31) or special applications (also called port triggering, see

“

Special Applications” on page 33).

1. Log into your router management page (see “

Access your router management page”

on page 24).

2. Click on Main, and click on LAN & DHCP Server.

3. Review the DHCP reservation settings.

• Static DHCP– Enable or Disable the DHCP reservation feature.

• Name – Enter a name for the reservation.

• IP Address – Enter the IP address to assign to the reservation. (e.g.

192.168.10.101)

Note: You cannot assign IP addresses outside of the DHCP range. The IP address is

required to be within the DHCP IP address range (Start IP & End IP).

• MAC Address – Enter the MAC (Media Access Control) address of the computer

or network device to assign to the reservation. (e.g. 00:11:22:AA:BB:CC)

• Add - Saves the reservation.

Static DHCP List – You can view the list of reservations for computers or devices that

have been created in this list.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-712BR Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-712BR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info