Bedienungsanleitung Trendnet TEW-712BR (Seite 30 von 51) (Englisch)

541687

Zoom out

Zoom in

Vorherige Seite

1/51

Nächste Seite

TRENDnet User’s Guide

TEW-712BR

To modify an existing reservation, click on the entry in the Static DHCP list. When

selected, the entry will be highlighted.

• Update – Saves changes to an existing reservation.

• Delete – Removes an existing reservation.

• Cancel – Discards changes to existing reservation.

Enable/disable UPnP on your router

Management > Remote Management

UPnP (Universal Plug and Play) allows devices connected to a network to discover each

other and automatically open the connections or services for specific applications (e.g.

instant messenger, online gaming applications, etc.) UPnP is enabled on your router by

default to allow specific applications required by your computers or devices to allow

connections through your router as they are needed.

1. Log into your router management page (see “

Access your router management page”

on page 24).

2. Click on Management, and click on Remote Management.

3. Next to UPnP, click Enabled or Disabled to turn the feature on or off on your router.

Note: It is recommended to leave this setting enabled, otherwise, you may

encounter issues with applications that utilize UPnP in order allow the required

communication between your computers or devices and the Internet.

4. To save changes, click Apply.

Allow/deny VPN connections through your router

Management > Remote Management

A Virtual Private Network (VPN) is a network that uses a public network, such as the

Internet, to provide secure communications between a remote computer or network

and another network. Some offices often provide VPN access to their networks to

enable employees to work from their remote office/home office, or while traveling.

If your office or place of work has allowed and authorized access for you to access their

network through VPN, the default VPN settings in your router have been configured to

pass through the most common types of VPN protocols, which typically do not require

any additional configuration changes.

1. Log into your router management page (see “

Access your router management page”

on page 24).

2. Click on Management, and click on Remote Management.

3. Next to PPTP, L2TP, or IPsec (depending the VPN protocol your corporation requires)

click Enabled or Disabled to turn the VPN pass through feature on or off on your

router.

Note: It is recommended to leave these settings enabled.

4. To save changes, click Apply.

Allow/deny multicast streaming

Management > Remote Management

In some cases, applications require multicast communication (also called IP multicast

which is the delivery of information to a specific group of computers or devices in a

single transmission) typically used in media streaming applications. Multicast streaming

is enabled by default on your router to allow applications that require multicast

communication through your router which typically does not require additional

configuration changes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trendnet TEW-712BR Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trendnet TEW-712BR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info