Bedienungsanleitung Trotec PAC3550PRO (Seite 10 von 19) (Englisch)

689434

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

10 EN

local air conditioner PAC 3550 PRO

Setting the operating mode

The device has the following operating modes:

• cooling

• ventilation

• dehumidification

Cooling

In cooling mode the room will be cooled down to a certain

preselected temperature.

1. Use the operating mode button(23) to select cooling mode.

ð COOL appears on the operating mode indication(27).

ð The currently selected target temperature is shown on

the segment display(21).

ð The currently selected fan speed is shown on the fan

speed indication(25).

2. Select the desired target temperature by use of the

increase value(20) or decrease value(22) button.

Temperatures between 17°C and 30°C can be selected.

3. Select the desired fan speed by use of the fan speed

button(19).

ð The target temperature and fan speed are shown on the

display.

Info

If the device is operated in a very humid environment,

the accumulating condensate must be discharged at

regular intervals (see chapter Condensate discharge).

Ventilation

Info

Remove the exhaust air hose during ventilation.

In ventilation mode the room air is circulated, but not cooled.

The respective stage HIGH/MID/LOW appears on the fan speed

indication(25) and the respective stage F3/F2/F1 appears on

the segment display(21). The temperature cannot be set.

1. Use the operating mode button(23) to select ventilation

mode.

ð FAN appears on the operating mode indication(27).

ð The currently selected fan speed is shown on the fan

speed indication(25).

2. Select the desired fan speed by use of the fan speed

button(19).

ð The respective stage HIGH/MID/LOW appears on the fan

speed indication(25) and the respective stage F3/F2/F1

appears on the segment display(21).

Dehumidification

In dehumidification mode the humidity level in the room is

reduced.

LOW is displayed on the fan speed indication(25) and F1

appears on the segment display.

If the room temperature is 15°C, the compressor starts. If the

room temperature drops below 15°C, the compressor stops

and only starts again at 15°C with a delay of approx.3min.

Info

Remove the exhaust air hose and supply air hose

during dehumidification, otherwise the

dehumidification performance is too low and FL is

displayed.

1. Use the operating mode button(23) to select

dehumidification mode.

ð DRY appears on the operating mode indication(27).

ð The temperature and the fan speed (LOW) are preset in

this operating mode and cannot be changed.

Info

If the device is operated in a very humid environment,

the accumulating condensate must be discharged at

regular intervals (see Condensate discharge (manual

draining) in the Maintenance chapter).

Setting the timer

The timer has two modes of operation:

• automatic switch-on upon expiry of a preset number of

hours.

• automatic switch-off upon expiry of a preset number of

hours.

The function can be set in all operating modes and also during

stand-by.

The number of hours can be between 1 and 24 and can be

adjusted in increments of 1h.

Note

Do not leave the operating device unattended in a

freely accessible room with an activated timer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PAC3550PRO Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PAC3550PRO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info