Bedienungsanleitung Trotec PAC3550PRO (Seite 12 von 19) (Englisch)

689434

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

12 EN

local air conditioner PAC 3550 PRO

Remote control

All settings of the device can also be made using the remote

control included in the scope of delivery.

Insert suitable batteries in the remote control (seechapter

Technical annex).

Info

After a longer period of non-use, the remote control

will switch to standby mode. Standby mode can be

terminated by pressing the POWER button on the

remote control Please note that the device

automatically takes over the current settings from the

remote control.

Cool Fan Dry

Heat

Timer

°C

°F

Auto

Swing

TIMER SWING °C °F

FAN

POWER

MODE

DOWN

No. Designation Meaning

18 TIMER button Automatic switch-on timer

function in increments of 1hour

(1h to 24h)

Automatic switch-off timer

function in increments of 1hour

(1h to 24h)

19 FAN button Setting the fan speed in 3stages:

High, Medium and Low

Only enabled in cooling and

ventilation mode.

20 UP button Increasing the target temperature

(17°C to 30°C) or

the number of hours of the timer

(1h to 24h).

21 Segment display Display of current room

temperature when in operation

Display of target temperature

while setting it

Display of timer

Display of error codes

22 DOWNbutton Decreasing the target temperature

(17°C to 30°C) or

the number of hours of the timer

(1h to 24h).

No. Designation Meaning

23 MODE button Selection button for the mode of

operation

cooling

ventilation

dehumidification

24 POWER button Power button:

Switching the device on or off

26 Timer indication Timer active

28 Battery indication Charging status of the batteries

for the remote control

29 Operating mode

indication

Cool= cooling

Fan= ventilation

Dry= dehumidification

30 Fan speed indication Low =

Medium =

High =

31 °C / °F button Switching temperature indication

between °C and °F

32 SWING button Adjusting the position of the

ventilation flaps

34 Transmission

indication

Indicates transmission to the

device when the button is pressed

35 Remote control

transmitter/ receiver

Communication between device

and remote control

Changing the unit °C / °F

The temperature in the segment display(21) can be indicated in

°C or °F.

Please proceed as follows to change the temperature unit:

1. Simultaneously press the increase value(20) and decrease

value(22) buttons.

Alternatively, you can press the °C/ °F button(31) on the

remote control.

ð The displayed temperature is converted to the other unit.

Swing function

The swing function can only be activated via the remote control.

Using the swing function, you can adjust the position of the

ventilation flaps or activate continuous movement of the

ventilation flaps.

1. Press the SWING button(32).

ð The ventilation flaps move up and down continuously.

ð The swing function indication(36) is illuminated.

2. Press the SWING button(32) again to stop the ventilation

flaps in a certain position and to switch off the swing

function.

ð The swing function indication(36) disappears.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PAC3550PRO Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PAC3550PRO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info