Bedienungsanleitung Trotec PAC3550PRO (Seite 11 von 19) (Englisch)

689434

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

EN 11

local air conditioner PAC 3550 PRO

Automatic switch-on

ü The device is switched off.

1. Press the timer button(18).

ð The timer indication(26) on the display is illuminated.

ð The current operating mode (COOL, FAN or DRY), the

fan speed and the flashing, current switch-on time in

hours are shown on the display.

2. Select the desired number of hours for the switch-on time

by use of the increase value(20) or decrease value(22)

button.

ð The number of hours flashes on the segment

display(21).

3. Adjust these settings as appropriate.

4. Wait for approx.5seconds until the display turns darker.

Your settings are now saved.

ð The respective stage HIGH/MID/LOW appears on the fan

speed indication(25) and the respective stage F3/F2/F1

appears on the segment display(21). Moreover, the

display will show the operating mode(27) and the timer

indication(26).

Notes regarding automatic switch-on:

• Manually switching the device on disables the automatic

switch-on function.

• If you select 0hours, the timer will be off.

Automatic switch-off

ü The device is switched on.

1. Select the desired operating mode by means of the

operating mode button(23).

2. Press the timer button(18).

ð The timer indication(26) on the display is illuminated.

3. Select the desired number of hours for the switch-off time

by use of the increase value(20) or decrease value(22)

button.

ð The number of hours flashes on the segment

display(21).

4. Wait for 5seconds in order to save the setting.

ð The display changes back to the previous indication.

ð The timer indication(26) is permanently illuminated to

confirm automatic switch-off.

Notes regarding automatic switch-off:

• Pressing the power button(24) deactivates the automatic

switch-off function.

Night mode

Night mode can only be activated in cooling mode. Night mode

comes with the following settings:

• After 2hours the preset temperature is increased by 1°C.

• After another 2hours the temperature is again increased

by 1°C, thus the preset temperature is increased by a total

of 2°C within 4hours. Afterwards, the temperature is kept

at this value.

• The fan speed is automatically lowered to the min. level

and cannot be changed manually.

• The swing function can be switched on via the remote

control if required.

To activate night mode, please proceed as follows:

1. Use the operating mode button(23) to select cooling mode.

2. Simultaneously press the timer(18) and decrease

value(22) buttons.

ð The fan speed is automatically adjusted to the lowest

level.

ð The night mode is not shown on the display.

3. To switch off night mode, simultaneously press the

timer(18) and decrease value(22) buttons again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PAC3550PRO Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PAC3550PRO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info