Bedienungsanleitung Trotec PMTS01-230V (Seite 15 von 21) (Englisch)

753364

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

EN 15

170W multi-function tool PMTS 01-230V

Tips and notes for selecting the correct speed level

• Select a high speed level for cutting, forming, chamfering

or milling grooves in the wood, and for sanding or grinding

wood or metal.

• If you wish to cut plastics or other materials with a low

melting point, select a low speed level.

• For drilling into wood, select a low speed level, in order to

prevent the tool from being overheated

• For polishing, buffing and cleaning with a wire brush,

select the lowest speed level1, in order to prevent the

brush from damage by bristles coming loose from the

brush holder.

• For milling or drilling into non-ferrous metals, e.g.:

aluminium, copper, lead, zinc alloys, select a low speed

level. Additionally use a cutting oil or another suitable

lubricant (not water) in order to prevent chips from settling

on the cutting edges of the tool, and to prevent the tool

from being overheated.

As an orientation for selecting the right speed level, you can use

the table below:

Stage Speed

1 10,000 - 14,000rpm

2 15,000 - 19,000rpm

3 20,000 - 24,000rpm

4 25,000 - 29,000rpm

5 30,000 - 34,000rpm

Max. 35,000rpm

Info

Even with lower speed values, you should work without

pressure. Applying higher pressure to the workpiece

will not improve the result. Use a different tool or

another speed setting to obtain the desired result.

Operation

Tips and notes on handling the multi-function tool

General information:

• Keep the venting slots clear to prevent the motor from

overheating.

• Check the tool in the tool holder for proper fit before every

application. The tool must be firmly locked in place in the

tool holder.

• Before every application, make sure that you have selected

the correct tool and the correct speed for the intended use.

By adapting the speed to the task you have planned and to

the m to be machined, better results can be obtained.

• Always hold the tool away from your face. Parts of

damaged accessories might come loose when high speeds

are reached.

• Before using the tool, you should get a feel for the tool.

Take the tool into your hand and familiarize yourself with

its weight and centre of gravity. Use some scrap material

to practise a bit and to learn how the tool responds with

different speed settings.

• For tasks requiring precision, like for example engraving,

polishing or sanding, you can also hold the tool between

your thumb and index finger like a pen. The tapering of the

housing on the lower part of the tool serves this purpose.

Cutting:

• Only use intact, flawless cutting discs. Bent, blunt or

otherwise damaged cutting discs could break.

• Never use the cutting disc for roughing!

• Only advance moderately during operation and make sure

that the cutting disc does not get jammed.

• Do not slow down the decelerating cutting disc by pressing

against the side of the disc.

• Always move the cutting disc through the workpiece in

reverse rotation.

Sanding:

• Maintain a consistent grinding pressure to increase the

lifetime of the abrasive wheels and abrasive belts.

• You'll obtain better results if the machining process not

only involves one single work cycle, but if you move over

the surface several times with the tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PMTS01-230V Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PMTS01-230V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info