Bedienungsanleitung Trotec PMTS01-230V (Seite 17 von 21) (Englisch)

753364

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

EN 17

170W multi-function tool PMTS 01-230V

Operating mode: Cutting

For cutting and cutting to length materials like for instance

wood, plastics, aluminium, brass or metal as well as protruding

nails or screws:

• use the cutting discs(8)

Operating mode: Sanding

For sanding wood, metal or steel:

• use the abrasive belts(24)

• or abrasive wheels(9)

For grinding rock or ceramic:

• use the aluminium oxide grinding heads(12)

For grinding or deburring tiles, glass or hard, brittle materials

such as ceramic:

• use the grinding stone(15)

Operating mode: Milling

For milling grooves, milling out moulds, apertures or

feedthroughs in wood or plastics:

• use the milling cutter for grooves(19)

• as well as the positioning fixture(25)

For recessing or grooving material, e.g. when machining

jewellery:

• use the milling cutter with the ball head(18)

Operating mode: Engraving

For creating engravings in materials like metal, plastics, glass,

ceramic, wood or leather:

• use the diamond-tipped engraving bits(11)

• and the flexible shaft(32)

Operating mode: Polishing

For polishing plastics or precious metals like gold and silver:

• use the polishing attachments(23)

Operating mode: Rust removal

For remove rust from damaged areas, for instance in the motor

vehicle sector:

• use the stainless steel brush(7)

Operating mode: Drilling

For drilling 3mm or 2mm holes into metal, wood or plastics:

• use the HSStwist drill bits(17)

Shutdown

Warning of electrical voltage

Do not touch the mains plug with wet or damp hands.

• Switch off the device.

• Hold onto the mains plug while pulling the power cable out

of the mains socket.

• If required, allow the device to cool down.

• Remove the tool from the device (see Start-up chapter).

• Clean the device according to the Maintenance chapter.

• Store the device according to the Storage chapter.

Available accessories

Warning

Only use accessories and additional equipment

specified in the instructions.

Using insertion tools or accessories other than those

specified in the instructions may cause a risk of injury.

Accessories Article number

Multi-function tool accessories

set 282-piece

6,210,000,301

Errors and faults

The device has been checked for proper functioning several

times during production. If malfunctions occur nonetheless,

check the device according to the following list.

Troubleshooting tasks which require the housing to be opened

must only be carried out by an authorized specialist electrical

company or by Trotec.

The only exception is the replacement of the carbon brushes

(see chapter Replacing the carbon brushes).

Light smoke or odour is emitted during the first use:

• This is not a fault. These phenomena disappear after a

brief runtime.

The device does not start:

• Check the power connection.

• Check the power cable and mains plug for damages. If you

notice damages, do not try to take the device back into

operation. To avoid safety hazards, do not perform any

repairs. Send the device to a specialist electrical company

or to Trotec to have the power cable and mains plug

replaced.

• Check the on-site fusing.

Info

Wait for at least 10 minutes before switching the

device back on.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Trotec PMTS01-230V Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Trotec PMTS01-230V

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info