Bedienungsanleitung Truma Mover Mover TE R4 (Seite 18 von 84) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch)

484649

Zoom out

Zoom in

Vorherige Seite

1/84

Nächste Seite

Conformity Declaration

1. Manufacturer master data

Name: Truma Gerätetechnik GmbH & Co. KG

Address: Wernher-von-Braun-Str. 12, D-85640 Putzbrunn

2. Equipment identification

Model / Version:

Mover® TE R4 manoeuvring aid

3. Complies with the requirements of the following

EC directives

3.1 R&TTE directive (1999/5/EC)

3.2 EMC directive (2004/108/EC)

3.3 Radio Interference in Vehicles 72/245/EEC

(with the supplements)

3.4 Machinery Directive 2006/42/EC

3.5 End of Life Vehicles (2000/53/EC)

and bears the type approval number e1 03 4473 and the

CE symbol.

Mover® TE R4:

Class 1, frequency 868 MHz.

Countries:

AT, BE, BG, CH, CY, CZ, DE, DK, EE, ES, FI, FR, GB, GR, HU,

IE, IS, IT, LT, LU, LV, MT, NL, NO, PL, PT, RO, SE, SI, SK.

4. Basis of proof of conformity

EN300220-2:2006, EN300220-1:2006 (R&TTE art. 3.2),

EN301489-1:2005, EN301489-3:2002 (EMC art. 3.1b),

EN61000-4-2:2001, EN61000-4-3:2006, EN61000-4-6:2001,

EN55022:2003 (Class B), ISO 7637-2:2004, EN60950:2001,

2004/104/EC, 2005/83/EC, 2006/28/EC, 2006/42/EC,

2000/53/EC

5. Monitoring body

Federal Motor Transport Authority

6. Information concerning position of undersigned

Signature: Dr. Schmoll

Executive Manager, Technology Putzbrunn, 26.11.2010

Manufacturer’s terms of warranty

1. Case of warranty

The manufacturer grants a warranty for malfunctions in the

appliance which are based on material or production faults.

In addition to this, the statutory warranty claims against the

seller remain valid.

A claim under warranty shall not pertain:

for parts subject to wear and in cases of natural wear

and tear,

as a result of using components in the units that are not

original Truma parts,

for gas pressure regulation systems as a result of damage

by foreign substances (e.g. oils, plasticisers) in the gas,

as a consequence of failure to respect Truma instructions

for installation and use,

as a consequence of improper handling,

as a consequence of improper transport packing.

2. Scope of warranty

The warranty is valid for malfunctions as stated under item 1,

which occur within 24 months after conclusion of the pur-

chase agreement between the seller and the final consumer.

The manufacturers will make good such defects by subse-

quent fulfilment, i.e. at their discretion either by repair or

replacement. In the event of manufacturers providing service

under warranty, the term of the warranty shall not recom-

mence anew with regard to the repaired or replaced parts;

rather, the old warranty period shall continue to run. More ex-

tensive claims, in particular claims for compensatory damages

by purchasers or third parties, shall be excluded. This does not

affect the rules of the product liability law.

The manufacturer shall bear the cost of employing the Truma

customer service for the removal of a malfunction under war-

ranty – in particular transportation costs, travelling expenses,

job and material costs, as long as the service is carried out in

Germany. The warranty does not cover customer service work

in other countries.

Additional costs based on complicated removal and installa-

tion conditions of the appliance (e.g. removal of furniture or

parts of the vehicle body) do not come under warranty.

3. Raising the case of warranty

The manufacturer‘s address is:

Truma Gerätetechnik GmbH & Co. KG

Wernher-von-Braun-Straße 12

85640 Putzbrunn, Germany

Always notify the Truma Service Centre or one of our author-

ised service partners if problems are encountered (see Truma

Service book or www.truma.com). Please describe you com-

plaint in detail and state the factory number of the device and

the purchase date.

In order for the manufacturer to be able to determine whether

an incident subject to guarantee has occurred, the end user

must, at his own risk, bring or send the device to the manu-

facturer. If there is damage to heat exchangers, the gas pres-

sure regulator must also be sent back to the factory.

Air conditioners:

To avoid transportation damage, the unit may only be sent to

the Truma Service Centre Germany or one of our authorised

service partners if agreed beforehand. Otherwise the sender

bears the risk for any transportation damage.

Please send all shipment to the factory as freight. In cases

under guarantee, the works shall bear the transport costs or

the costs of delivery and return. If the damage is deemed not

to be a warranty case, the manufacturer shall notify the cus-

tomer and shall specify repair costs which shall not be borne

by the manufacturer; in this case, the customer shall also bear

the shipping costs.

–

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Truma Mover Mover TE R4 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info