3.3 PowerMaster-360 connections
Figure 3.3 – PowerMaster-360 Panel Connections
Note: If there is a GSM module in your control panel, first connect the SIM card before performing the following
procedure, see section 3.5 for details:
1. Connect the DC power supply from the mains electrical socket to the power connection.
2. Connect the IP cable from the LAN connection to the local home-router connection.
3. To work with the Configurator, connect the micro USB cable from the micro USB connection to the PC/laptop/tablet
connection.
4. After completing the setup in the configurator, disconnect the USB cable from the PowerMaster-360.
Note: For details about installing and configuring the virtual keypad software, see APPENDIX A PowerMaster-360 USB
Configurator and APPENDIX B PowerMaster-360 Mobile Installer Application.