Bedienungsanleitung Visonic Powermaster-360 (Seite 40 von 96) (Englisch)

769323

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

40 D-307500 PowerMaster 360 Installer's Guide

Option

Configuration Instructions

GSM/GPRS FAIL

(Return)

BROADBAND FAIL

(Return)

reported or not, and the time delay between detection of the failure and reporting of the failure

event to the Monitoring Station. A trouble event (for example, GSM line fail) is stored in the

event log.

Determines whether a failure in the broadband communication channel is reported or not. You

can specify the time delay between the detection of the failure and reporting of the failure event

to the Monitoring Station. This event is stored in the event log.

Previously known as

LINE FAIL REPORT

Options: after 1/2/5/15/30 min, 1/3/6 hours, and do not report (default).

61:RPRT CNF ALRM

Define whether the system will report whenever 2 or more events (confirmed alarm) occur

during a specific period or enable the report and bypass the detector.

Options: rprt disabled (default), rprt ena+bypass and rprt enabled

Note: In some PowerMaster-360 variants, this menu is displayed in the Operation Mode only.

62:RECENT CLOSE

False alarms may occur if users do not exit the premises within the exit delay period, resulting

in a false alarm a short time later. In such cases, inform the Monitoring Station that the alarm

occurred shortly after the system was armed (this event is known as Recent Close). The

report enabled option sends a recent closing report to the Monitoring Station if an alarm occurs

within 2 minutes from the end of the exit delay.

Options: report disabled (default) and report enabled

63:ZONE RESTORE

Some Monitoring Stations require that following an alarm event from a specific zone, the

system will also report when the alarming zone has restored to normal.

Options: report enabled (default) and report disabled

64:SYST.INACTIVE

The PowerMaster-360 can report a System Inactive event message (CID event 654) to the

Monitoring Station if the system is not used (armed) during a predefined time period.

Options: report disabled (default); after 7/14/30/90 days.

66:24H ZONE RPRT

Applicable in UK only

Define whether 24 hour (silent and audible) zones will function as normal 24 hour zones or as

panic zones.

Options: audible as panic; silent as panic; both as panic; and both burglary (default).

Event reporting chart

To simplify the configuration of reporting system events to Monitoring Stations, the event messages are divided into 4

Event Groups as described in the table below. Due to lack of space in the display, the following abbreviations are used:

alrm, alrt, o/c, and all (all events).

Event Group

Abbr.

Events Messages Reported

Alarms

alrm

Fire, CO, Burglary, Panic, Tamper

Open/close

o/c

Arming AWAY, Arming HOME, Disarming

Alerts

alrt

No-activity, Emergency, Latchkey

Trouble

All other Trouble events not indicated above, e.g. Missing, Jamming, Communication Fail,

Low Battery, AC failure etc.

Note: Alarms group has the highest priority and Alerts group has the lowest priority.

The PowerMaster-360 allows you also to select which event groups will be reported to each of the two Monitoring

Stations. The table below describes the available reporting options. The minus (-) symbol means "but/less/except" e.g.

all(-alrt) means all events except alerts. The asterisk () is a separator between event messages reported to

Monitoring Station 1 (C.S.1) and event messages reported to Monitoring Station 2 (C.S.2).

Available Reporting Options

Events Reported to C.S. 1

Events reported to C.S. 2

all  backup

All

All, only if C.S.1 does not respond

all-o/c  backup

All but open/close

All but open/close, only if C.S. 1 does not respond

all  all

All

all-o/c  all-o/c

All but open/close

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Visonic Powermaster-360 Seite 40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info