Bedienungsanleitung Visonic Powermaster-360 (Seite 85 von 96) (Englisch)

769323

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

D-307500 PowerMaster 360 Installer's Guide 85

APPENDIX E. Working with Partitions

Your alarm system is equipped with an integrated partitioning feature that can divide your alarm system into three

distinct areas identified as Partition 1 through 3. A partition can be armed or disarmed regardless of the status of the

other partitions within the system. Partitioning can be used in installations where shared security systems are more

practical, such as a home office or warehouse building. When partitioned, each zone, each user code and many of your

system's features can be assigned to Partition 1 to 3. Each user code is assigned with the list of partitions it is allowed

to control in order to limit access of users to certain partitions.

When partitioning is enabled, menu displays are changed to incorporate the partition feature and also each device, user,

and proximity tag has additional partitions menu, where it is assigned to certain partitions and excluded from others.

Note: When Partition Mode is disabled, all zones, user codes, and features of the control panel will operate as in a

regular unit. When partition mode is enabled, all zones, user codes, and features of the control panel are

automatically assigned to Partition 1.

E1. User Interface and Operation

Refer to the control panel User's Guide APPENDIX B. PARTITIONING for a detailed description of the user interface

(Arming/Disarming, siren behavior, show function, etc.), and APPENDIX A for keyfobs and keypads operation in

Partition Mode.

E2. Common Areas

Common areas are areas used as walkthrough zones to areas of 2 or more partitions. There may be more than one

common area in an installation depending on the layout of the property. A common area is not the same as a partition;

it cannot be armed / disarmed directly. Common areas are created when you assign a zone or zones to 2 or 3

partitions. Table A1 summarizes the behavior of the different zone types in a common area.

Table A1 – Common Area Definitions

Common area zone types

Definition

Perimeter

 Acts as defined only after the last assigned partition is armed AWAY or HOME.

 In case that one of the partitions is disarmed, an alarm initiated from this zone is

ignored for all assigned partitions.

Delay zones

 Delay zones will not trigger an entry delay unless all assigned partitions are armed.

It is, therefore, not recommended to define delay zones as common areas.

Perimeter follower

 Act as defined only after the last assigned partition is armed AWAY or HOME.

 In case that one of the partitions is disarmed, an alarm initiated from this zone is

ignored for all assigned partitions.

 In case that one of the common area assigned partitions is in a delay state (and

the other partitions are armed), the alarm will behave as a perimeter follower for

this partition only. The event will be ignored for other assigned armed partitions.

Interior

 Acts as defined only after the last assigned partition is armed AWAY.

 In case that one of the partitions is disarmed or armed HOME, an alarm initiated

from this zone is ignored for all assigned partitions.

Interior follower

 Acts as defined only after the last assigned partition is armed AWAY.

 In case that one of the partitions is disarmed or armed HOME, an alarm initiated

from this zone is ignored for all assigned partitions.

 In case that one of the common area assigned partitions is in a delay state (and

the other partitions are armed), the alarm will behave as an interior follower for this

partition only. The event will be ignored for other assigned armed partitions.

Home / Delay

 Acts as a Perimeter-Follower type when all assigned partitions are armed AWAY.

 Acts as a Delay type when at least one of the assigned partitions is armed HOME.

 Will be ignored when at least one of the assigned partitions is disarmed.

Emergency; Fire; Flood; Gas;

Temperature; 24-hour silent;

24-hour audible; Non-alarm

 Always armed.

Note: A Soak Test of Common areas cannot be initiated when one of its partitions is armed. When Soak Test of a

Common area is active, an alarm event is ignored unless all the partitions that are assigned to the zone are armed.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Visonic Powermaster-360 Seite 85

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info