Bedienungsanleitung Visonic Powermaster-360 (Seite 91 von 96) (Englisch)

769323

Zoom out

Zoom in

Vorherige Seite

1/96

Nächste Seite

D-307500 PowerMaster 360 Installer's Guide 91

APPENDIX I. Glossary

Abort Period: When an alarm is initiated, the internal sounder is activated first for a limited period of time which is the

abort period set by the installer. If you cause an alarm accidentally, you can disarm the system within the abort period

before the real sirens start and before the alarm is reported to the remote responders.

Alarm: There are 2 kinds of alarms:

Loud alarm – the external siren blares out constantly and the control panel reports the event.

Silent alarm – the sirens remain silent, but the control panel reports the event.

A state of alarm is caused by:

 Motion detected by a motion detector (when the system is in the Armed state)

 Change of state detected by a magnetic contact detector – a closed window or door is opened

 Detection of smoke by a smoke detector, detection of gas by a gas detector and detection of water based fluids by

a flood detector (when in any state).

 Tampering with any one of the detectors

Arming: Arming the alarm system is an action that prepares it to sound an alarm if a zone is “violated” by motion, or by

opening a door or window. The control panel may be armed in various modes (see AWAY, HOME, INSTANT and

LATCHKEY).

Assigned: Refers to zones.

Associated: Refers to devices.

AWAY: This type of arming is used when the protected site is vacated entirely. All zones, interior and perimeter alike,

are protected.

Chime Zones: Allow you to keep track of activity in the protected area while the alarm system is in the disarmed state.

Whenever a chime zone is "opened", the buzzer beeps twice via the Configuration device (PC or mobile). The buzzer

does not beep, however, upon closing the zone (return to normal). Residences can use this feature to annunciate

visitors or look after children. Businesses can use it to signal when customers enter the premises or when personnel

enter restricted areas.

Note: Your installer will never designate a 24-hour zone or a fire zone as a chime zone, because both zone types

actuate an alarm if disturbed while the system is in the disarmed state.

Although one zone or more are designated as chime zones, you can still enable or disable the chime function.

Communicators: Refers to communication channel, for example, GSM.

Control Panel: The control panel is a cabinet that incorporates the electronic circuitry and microprocessor that control

the alarm system. It collects information from various sensors, processes it and responds in various ways. It also

includes the user-interface – control keys, numerical keypad, display, sounder and loudspeaker.

Default Settings: Settings that are applicable to a specific device group.

Detector: The device (apparatus) that sends an alarm, that communicates with the control panel (for example,

Next PG2 is a motion detector; SMD-426 PG2 is a smoke detector).

Disarming: The opposite of arming - an action that restores the control panel to the normal standby state. In this state,

only fire and 24-hour zones will sound an alarm if violated, but a “panic alarm” may also be initiated.

Disturbed Zone: A zone in a state of alarm (this may be caused by an open window or door or by motion in the field of

view of a motion detector). A disturbed zone is considered “not secured”.

Forced Arming: When any one of the system zones is disturbed (open), the alarm system cannot be armed. One way

to solve this problem is to find and eliminate the cause for zone disturbance (closing doors and windows). Another way

to deal with this is to impose forced arming - automatic de-activation of zones that are still disturbed upon termination

of the exit delay. Bypassed zones will not be protected throughout the arming period. Even if restored to normal

(closed), bypassed zones will remain unprotected until the system is disarmed.

Permission to “force arm” is given or denied by the installer while programming the system.

HOME: This type of arming is used when people are present within the protected site. A classic example is night-time

at home, when the family is about to retire to bed. With HOME arming, perimeter zones are protected but interior zones

are not. Consequently, motion within interior zones will be ignored by the control panel, but disturbance of a perimeter

zone will cause an alarm.

Instant: You can arm the system AWAY-INSTANT or HOME-INSTANT, thereby canceling the entry delay for all delay

zones for the duration of one arming period.

For example, you may arm the control panel in the HOME-INSTANT mode and remain within the protected area. Only

perimeter protection is active, and if you do not expect somebody to drop in while the system is armed, alarm upon

entry via the main door is an advantage.

To disarm the system without causing an alarm, use your control keypad (which is normally accessible without

disturbing a perimeter zone) or use a keyfob transmitter.

Latchkey: The Latchkey mode is a special arming mode in which designated "latchkey users" will trigger a "latchkey

message" to be sent to a telephone when they disarm the system.

For example, if a parent wants to be sure that their child has returned from school and disarmed the system. Latchkey

arming is only possible when the system is armed in the AWAY mode.

Visonic Powermaster-360 Seite 91

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info