Bedienungsanleitung Vonroc CR506AC (Seite 10 von 112) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Türkisch, Schwedisch)

819186

Zoom out

Zoom in

Vorherige Seite

1/112

Nächste Seite

WWW.VONROC.COM

Reduce the pressure in the tank till approximately

2 bar by connecting and activating an air tool.

2. Then slowly turn the drain cock (11) on the lo-

wer side of the tank open. The water in the tank

will now leak out of the tank.

3. Take care when compressed air is in the tank

because the water can come out with some

force. Recommended pressure max. 1-2 Bar.

Clean the air ﬁlter (Fig. G)

It is recommended to disassemble the

suction ﬁlter every 50 operating hours and

to clean the ﬁlter element by blowing it with

compressed air.

It is recommended that the ﬁlter element is

replaced at least once a year if the

compressor is working in a clean environ-

ment; more often if the environment in

which the compressor is situated is dusty.

A clogged intake ﬁlter will decrease the

compressor’s performance dramatically.

1. Open the halves of the air ﬁlter housing. Use

compressed air at low pressure (approx. 3 bar)

to blow out all the parts of the ﬁlter

2. Assemble the ﬁlter in reverse order.

STORAGE AND FROST POTECTION

The compressor and accessories that are not

completely drained can be destroyed by frost. Com-

pletely drain the compressor and accessories and

protect them against frost. Keep this appliance in

well-ventilated dry premises with temperature not

going below +5°C.

When not in use, keep this appliance stored in a

safe place out of reach of children.

Malfunction

Should the machine fail to function correctly, a

number of possible causes and the appropriate

solutions are given below:

Air loss

• May be caused by a poor seal of a connection.

• Check all air connections by wetting them with

a soapy water solution (Never use the solution

nearby electric connections).

• When the tank is empty and being ﬁlled. The

user might hear a sisseling sound by the pres-

sure switch. This is normal and will stop before

the compressor reach a pressure of 1.5 bar.

• Check if the drain cock (11) is closed well.

The compressor will not start

If the compressor is difﬁcult to start, check:

• Whether the voltage of the mains corresponds

to that on the speciﬁcation plate.

• Whether electrical extension cables are being

used with a faulty core or length.

• Whether the operating environment is too cold

(below 5°C).

• Whether there is electricity supply (plug properly

connected, magneto-thermal fuses not broken).

The compressor does not shut off

If the compressor does not shut off when the

maximum pressure has been reached, the safety

valve of the tank will be activated. It is necessary to

contact the nearest authorised Support Service for

the repair.

ENVIRONMENT

Faulty and/or discarded electrical or

electronic apparatus have to be collected at

the appropriate recycling locations.

Only for EU countries

Do not dispose of power tools into domestic waste.

According to the European Guideline 2012/19/EU

for Waste Electrical and Electronic Equipment and its

implementation into national right, power tools that

are no longer usable must be collected separately

and disposed of in an environmentally friendly way.

WARRANTY

VONROC products are developed to the highest

quality standards and are guaranteed free of

defects in both materials and workmanship for the

period lawfully stipulated starting from the date of

original purchase. Should the product develop any

failure during this period due to defective material

and/or workmanship then contact VONROC directly.

The following circumstances are excluded from this

guarantee:

• Repairs and or alterations have been made

or attempted to the machine by unauthorized

service centers;

• Normal wear and tear;

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc CR506AC Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info