Bedienungsanleitung Vonroc HA501AC (Seite 6 von 28) (Deutsch, Englisch, Holländisch, Französisch)

764012

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

WWW.VONROC.COM

• Keep children and animals away from the appli-

ance if you are using it.

Immediately switch off the appliance when:

• Plug and/or cable are defective or damaged;

• The switch is defective;

• You smell or see smoke caused by scorched

insulation from the hot air gun.

Electrical safety

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of ﬁre, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions.

Always check that the power supply

corresponds to the voltage on the rating

plate.

Class II machine - Double insulation - You

don’t need any earthed plug

2. MACHINE INFORMATION

Intended use

This hot air gun is intended for a wide range of

applications including plastic welding, the defor-

mation of material, heat-shrink tubing, removing

material residues or drying paint. It is also suitable

for loosening of adhesive joints and the defrosting

of water lines.

TECHNICAL SPECIFICATIONS

Model No. HA501AC

Voltage 220-240 V~

Frequency 50 Hz

Power input 2000 W

Weight 0.66 kg

IP Class IP 20

Position I

Air ﬂow 250 l/min

Air temperature 400 °C

Position II

Air ﬂow 500 l/min

Air temperature 600 °C

Vibration level

The vibration emission level stated in this instruc-

tion manual has been measured in accordance

with a standardized test given in EN60745; it may

be used to compare one tool with another and as

a preliminary assessment of exposure to vibration

when using the tool for the applications mentioned.

• Using the tool for different applications, or with

different or poorly maintained accessories, may

signiﬁcantly increase the exposure level.

• The times when the tool is switched off or when

it is running but not actually doing the job, may

signiﬁcantly reduce the exposure level.

Protect yourself against the effects of vibration by

maintaining the tool and its accessories, keeping

your hands warm, and organizing your work pat-

terns.

DESCRIPTION

The numbers in the text refer to the diagrams on

pages 2 - 3

Fig. A-C

1. Switch

2. Ventilation slots

3. Nozzle outlet

4. Fishtail nozzle

5. Reduction nozzle

6. Glass protection nozzle

7. Flat rear side

3. OPERATION

The Hot air gun can be used for:

• Plumbing work like tube connections, solder,

bowing tubes;

• Removing paint, varnish and lacquer without

ﬁrerisk;

• Quickly drying of appliances which have beco-

me wet;

• Drying surfaces for quick repairing;

• Removing self-adhesive labels in a clean way

placing PVC labels;

• Blistering after sticking PVC materials can be

smoothed after heating;

• Easy removing of vinyl carpeting:

•

Forming all synthetics with a low temperature (400

degrees) among which polyethylene and PVC;

• Forming all synthetics with a high temperature

(600 degrees) among which acryl and plexiglass;

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Vonroc HA501AC Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Vonroc HA501AC

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info